Puma Bonnets

Puma Bonnets for Land Rover Defender

Puma Bonnet for Land Rover Defender

  • Suitable for all Defenders from 200tdi to Puma models.
  • We have both genuine OEM Land Rover Puma Bonnets made of aluminium (part number BKA710140), and cheaper aftermarket versions – both standard and reinforced.
  • The aftermarket version Land Rover Defender Puma Bonnet is made of GRP – Glass Reinforced Plastic with steel fixtures for original fasteners; it is durable and flexible for heavy use. It is light-weight compared to original aluminium Defender bonnets – the net weight is 10KG. Noise transmission is much less than the OEM aluminium version. It will reduce the engine noise.
  • NOTE : Both types are unfinished – meaning they require some filling, primer and top coats of paint.

KIT - Dark Tint Side Windows + Quarters & Rear Glass - Defender PUMA (Fixed/Sliding) (50/70 radius)

Masai-LRD-FW5070-KIT
£666.00
In stock
1
Product Details
Manufacturer: Masai
Suitable Vehicle: Defender 200TDi/300TDi, TD5 and PUMA
Sold As: SLIDING Kit (Side Windows, Quarters and Rear Door)
Colour: Factory Dark Tinted (70%)

KIT - Dark Tint Side Windows + Quarters & Rear Glass - Defender PUMA (Fixed/Sliding)

NOTE: Please check your current windows are a 50/70 radius type window, this window is also bonded in, not riveted in. Land Rover changed the radius's around 2004/2005 to 50/70.

Kit includes:

  1. PAIR of dark tinted, sliding, lockable side windows. 4 mm thick toughened glass. Aluminium frame, black automotive powder-coated paint. (Choose Fixed or Sliding version)
  2. Side window rubber seal trim (approx 6.2m to cover the rivet channels).
  3. Rear door glass - heated with dark tint 5 mm thick toughened glass. (Choose between Pre 2002 and Post 2002 versions)
  4. PAIR of tinted quarter lights - 4 mm thick toughened glass.

If your Defender is a hardtop and does not currently have rear side windows you will need to purchase our template and either of our 50mm or 70mm side windows can be fitted irrespective of the year of your vehicle. If you want to keep to original radius's for your Defender then you want 50/50 radius for Pre 2004 Defenders, and 50/70 radius for Post 2004 Defenders.

Features

  • Standard size replacements. The size of the aperture needed is 1057mm x 427mm - which is the Land Rover standard size for Defender rear side windows
  • High quality Masai product.
  • Toughened (tempered) safety glass E43R ‚Äì 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
  • 70% no light transmission high quality factory-prepared dark tint ‚Äì NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
  • Heat reflecting coating, glare reduction glass.

Equivalent and compatible with Land Rover part numbers:

  • MUC3766 (50mm) superseded by MWC4734 (70mm).
  • MUC3767 (50mm) superseded by MWC4735 (70mm).

Options

  1. With or without paper template - needed if you are converting a hard top/panel van.
  2. Replacement Rivets and Sealant.
  3. Quarter light seals - outer fitting seal and inner locking seal.

Fitting Instructions

Download Masai Defender side windows Fitting Instructions.

Please Note: Carefully remove the rear door glass without damaging the rubber seal - as you will need to re-use the rubber. Carefully remove brake light and brackets from old rear door glass as you will need to glue to new glass.

We also supply tinted glass for the middle row doors for a 110 defender, see below.

Save this product for later