Suitable for all Defenders from 200tdi to Puma models.
We have both genuine OEM Land Rover Puma Bonnets made of aluminium (part number BKA710140), and cheaper aftermarket versions – both standard and reinforced.
The aftermarket version Land Rover Defender Puma Bonnet is made of GRP – Glass Reinforced Plastic with steel fixtures for original fasteners; it is durable and flexible for heavy use. It is light-weight compared to original aluminium Defender bonnets – the net weight is 10KG. Noise transmission is much less than the OEM aluminium version. It will reduce the engine noise.
NOTE : Both types are unfinished – meaning they require some filling, primer and top coats of paint.
+3
Dark Tint Camper-Style Rear Window for Defender Crew Cab - 963mm x 419mm.
DEF963x419
£334.80
Out of stock
1
Product Details
Dark Tint Camper-Style Rear Window for Defender Crew Cab - 963mm x 419mm.
Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the Crew Cab Rear Window aperture.
Once you have cut the correct shaped aperture, you will need rivets and adhesive sealant (purchase below) to attach the Crew Cab Rear Window.
If you need the Crew Cab Rear Window completely wide open the gas strut brackets can be unscrewed from the frame.
The Crew Cab Rear Window can also be used on the roof of a vehicle as a sun roof, in this case the drain holes must be blocked with silicone sealant.
SOLD as SINGLE WINDOWS (Price is NOT for a pair).
Includes two Gas Struts for smooth opening and closing.
Two handle locking with keys.
The maximum amount the Crew Cab Rear Windows will open is as seen in the above photo and is 200mm from the vehicle body.
Measurements: 963mm x 419mm external max.
The size of the aperture needed is 913mm x 369mm.
The Radius of the cut out aperture needs to be 76mm.
Black powder-coat painted aluminium frame.
Made to original Land Rover quality - BUT they do not rattle or leak.
Includes rubber seal and internal bezel.
E43 4mm toughened safety glass.
70% No-Light transmission Dark Tint.
Factory prepared tint - not a stuck on film.
Easy to fit DIY.
Fitting service also available - just call.
The Crew Cab Rear Window can be fitted to:
Land Rovers and other 4x4
Other Shooting/Leisure vehicles
Trucks with Sleeping Pods
Coaches and Lorries
Containers/Sheds in Gardens
Horseboxes
Motor Caravans / Motor Home
Towed Caravans
Mobile Exhibition Trailer
Porta-cabins / Mobile Buildings / Other Enclosure
Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss
These fitting instructions are NOT actually for this specific rear window but the principles are the same. Be very careful to cut the exact shape aperture needed.