Puma Bonnets for Land Rover Defender
- Suitable for all Defenders from 200tdi to Puma models.
- We have both genuine OEM Land Rover Puma Bonnets made of aluminium (part number BKA710140), and cheaper aftermarket versions – both standard and reinforced.
- The aftermarket version Land Rover Defender Puma Bonnet is made of GRP – Glass Reinforced Plastic with steel fixtures for original fasteners; it is durable and flexible for heavy use. It is light-weight compared to original aluminium Defender bonnets – the net weight is 10KG. Noise transmission is much less than the OEM aluminium version. It will reduce the engine noise.
- NOTE : Both types are unfinished – meaning they require some filling, primer and top coats of paint.
Sliding Side Windows for Defender PUMA/TDCi (Post 04/05) - (50/70 Radius) - 3 Tints - Pair
Sliding Side Windows for Land Rover Defender Puma/TDCi (50/70 Radius) - PAIR
Equivalent to Land Rover part numbers MWC4734 RH, MWC4735 LH.
Manufactured to the same quality as our standard dark tinted windows, these windows have 70mm radius bottom corners to fit the unique internal trim on the new style Puma TDCi Defenders.
DO NOT PURCHASE THESE if your defender is 200/300 TDi / TD5 with factory fitted windows, the 50mm PRE-Puma/TDCi version is here.
If your Defender is a hardtop and does not currently have rear side windows then either of our 50mm or 70mm side windows can be fitted irrespective of the year of your vehicle.
If you have a panel van Defender either 200/300 TDi / TD5, and you are deciding to convert it into a Puma/TDCi style and planning on having Puma/TDCi internal trims then you may choose to use these windows listed here. However, if you are deciding to use TD5 internal trims then please purchase the TD5 side windows with 50mm radius bottom corners here.
- Price is for a pair - offside and nearside
- Colour options.
- Compatible with Land Rover part numbers MWC4734 RH, MWC4735 LH.
- Made to original Land Rover quality - BUT they do not rattle or leak
- Original quality Land Rover aluminium profile and catches
- Standard size replacement for 50mm upper and 70mm lower radius window apertures
- Includes rubber seal/trim which covers over the rivet heads
- E43R toughened safety glass
- Factory prepared tint - not a stuck on film
- Easy to fit DIY
- The size of the aperture needed is 1057mm x 427mm - which is the Land Rover standard size for Defender rear side windows
- Fitting service also available - just call
Download: Masai Defender side windows Fitting Instructions
Read our article about the best way to locate your side windows here
Optional extras
- Template to help cut out aperture - needed if you are converting a panel van/hard top
- Rivets and Sealant (to save you the hassle of going to the DIY store)
