Rear Door and Quarter Light Windows

These Defender rear windows have been designed as standard size replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. Land Rover Defender rear door glass is easy to fit if you know a bit about DIY. Fitting service also available – just call.

Our Defender rear windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms. The dark tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.

Rear Door Glass - Dark Tinted & Heated for Pre 02' Land Rover Defenders 90/110 - (Bonded)

LRD-RDG-PRE2002

Rear Door Glass - Dark Tinted & Heated for Pre 02' Land Rover Defenders 90/110 - (Bonded) LRD-RDG-PRE2002

Rear Door Glass - Dark Tinted & Heated for Pre 02' Land Rover Defenders 90/110 - (Bonded)

This replacement Rear Door Glass is BONDED to the inside of the rear door, suitable for doors that are flat at the bottom of the aperture. As shown in the photo above. Usually Defenders Pre-2002, but you may have fitted a newer door so make sure to double check.

  • Standard size replacement. (Original Part Number: LR042729)
  • High quality Masai product.
  • 4mm toughened (tempered) safety glass E43R – 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
  • 70% no light transmission high quality factory-prepared dark tint – NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
  • Heat reflecting coating, glare reduction glass.

Options

  1. Add Silicone Sealant for Pre 2002 Defenders only.
  2. Add a pair of studs to fit high-level brake lights (Land Rover part number AWR4647).
£135 In stock
Manufacturer:Masai®
OEM Part No.:LR042729
Application:Rear Door Glazing
Vehicle:Defender 90 & 110
Add Fitting Kit? Silicone Sealant for Bonding (8.33)
Add studs to fit high-level brake light? Yes (Pair) (8.33)
Add Glazing Retainer Kit? Aluminium Strips (6 Pieces) (10)
Rear Door Glass - Dark Tinted & Heated for Pre 02' Land Rover Defenders 90/110 - (Bonded) OPTIONAL Studs to fit high-level brake lights