Roof Racks For Land Rovers

Land Rover Defender Roof Racks

We design and manufacture Roof Racks for the Land Rover Defender 90, 110 and Discovery 1 and 2 series – but they may fit other vehicles too – just call us to discuss. Defender Roof Racks are available in three lengths 1.5m, 2.15m and 2.8m. The steel versions have zinc plating and thermoplastic powder coat paint for long life rust protection. Masai Defender Roof Racks are easy to assemble and are supplied with fitting instructions.

We also designed the Masai Defender Flat Roof Racks in 1.5m, 2.15m and 2.8m for Land Rover Defender 90 and 110 – suitable for folding roof tents. The Masai Luggage Roof Racks have a rail that is too high for folding tents, hence why we designed the Masai Flat Roof Racks for Land Rover Defenders. In Spring 2014 we launched our stylish Masai Tubular Roof Racks for Land Rover Defender 90 and 110, and Aluminium Defender Roof Racks are NEW for 2016.

Internal Window Trims Kit for Land Rover Defender 90/110 - PUMA (07' - 16') - Masai Covered

IWT-90PUMA-MAS-BLK
£478.80
In stock
1
Product Details
Manufacturer: Masai
Suitable Vehicle: Defender 90/110 - PUMA (07' - 16')
Sold As: Defender 90 (4 piece kit), Defender 110 (8 piece kit)

Internal Window Trims Kit for Land Rover Defender 90/110 - PUMA (07' - 16') - Masai Covered

NOTE: This Defender window trims kit will show as IN STOCK to allow you to order, however there might be a 4-6 week lead time. Your chosen colour choice could be available right away, in that case you will receive within 2-5 working days after making payment. You're welcome to call us and enquire about which colours we have available now.

Spruce up the interior of your Defender PUMA by fitting an internal window trim kit. Including rear side window and quarter light trims - 4 pieces in total - Masai’s internal window trim kit covers the bare metal surrounding the rear side windows and quarter lights.

These kits are supplied pre-covered with fabric to suit most Land Rover interiors, you can match to your headlining, or seats or carpet colours. We think our internal window trim kits look fantastic paired with a set of our interior strip lights, which add a bespoke twist to a utilitarian classic.

  • 90 KIT - Rear side window internal trims with seat belt holes AND quarter light internal trims (4 pieces) When upgrading from a hardtop to County Station Wagon you will need to have either use one of our bulkhead reduction kits or cut the trim to bypass the full bulkhead as shown in the photo.
  • 110 KIT - Rear Side window internal trims with seat belt holes, quarter light internal trims, 2nd door trim and front door seat belt trim. (8 pieces)
  • Included: Fir Tree Clip Adhesive Coverings - We supply a sheet of adhesive fabric with cutouts, that allow you to stick onto the fir trees to match the colour to the Internal trims. (See photo in the thumbnails above) - These come supplied for ALL 9 different colours!
  • Manufactured by Masai, covered in high quality fabric used on our new Defender 90/110 Headlinings.
  • Made of high-quality GRP.
  • Ideal for replacing worn trim kits or converting a panel-van into a County spec.
  • Equivalent to official Land Rover part numbers MWC5832LOY, MWC8910LNP, ENV500170LOY, MWC8911LNP
  • Fits Puma Land Rover Defenders from 2007 to 2016. (For Forward Facing Seats)
  • Top corner radius' is 50mm and bottom corner radius' is 70mm.
  • DIY installation. (Fitting service available.)

Download Internal Trim Fitting Instructions.

Masai fitting service

We highly recommend this extra:

(See "You May Also Like" section below to add any extras to your basket).

Pair of Internal Window Trims Finisher Posts - please pick a colour

Trims Finisher Posts are highly recommended extras to neaten up the edges and fill the gaps. These window trim finisher posts are available as uncovered plastic or covered in the same material and colours as our internal window trim kits and are available for Defender 90 and 110 models up to 2016.

You may also be interested in these optional extras:

Station Wagon conversion retaining clips

If your vehicle is NOT a factory station wagon, and you are converting to a station wagon, then you will need these clips to secure the internal window trims. Land Rover part number MXC3277.

Interior LED Vehicle Strip Lights

Enhance and brighten the interior of your vehicle with low power consumption LED strip lights. Various Sizes and Voltages: 245mm long, 400mm long, or 555mm long. We think our internal window trim kits look fantastic paired with a set of these strip lights, which add a bespoke twist to a utilitarian classic.

Internal grab handle

An internal Grab Handle for Defender headlining (sold in singles) fits above the rear door. It also helps retain the headlining. Genuine Land Rover part no JPC5640LNF.

Save this product for later