We sell Land Rover Defender Snorkel Kits (also known as a Raised Air Intake). Snorkels protect engines from the damaging effects of water, dust and sand encountered in touring and off-roading.
Snorkel kit versions for Land Rover Defender 200TDI (left hand fitting kit) and 300TDI, TD5 and TDCI Puma (right hand fitting kit). Snorkel Kits are original Land Rover part number STC50265. For the 300TDI, TD5 and Puma we supply a right-hand bracket.
Roll-cage Snorkel – We also make a Defender Snorkel Kit version for Defenders with roll cages – the lower fitting is different to standard as it protrudes slightly more to accommodate for the position of the roll-cage tubing. The Masai Land Rover Defender Roll Cage Snorkel Kit is available for left hand side 200TDI and right hand 300TDI, TD5 and TDCI Puma.
Fixed Full Length Masai Panoramic Tinted Windows for Defender 110 2-Door Hardtop
Fixed Full Length Masai Panoramic Tinted Windows for Defender 110 2-Door Hardtop
USA and 
CANADA CUSTOMERS: We cannot ship this product with the adhesive fitting kit due to customs restrictions. You will need to source your own adhesive. We recommend at least 300ml x 3 of window adhesive to fit the sides and quarter light windows.
NOTE: Our Panoramic windows will only fit Defenders POST 1989, due to strengthening bracket behind the front doors.
- Each side comprises of two pieces of glass (Main side piece & extension glass). Extension glass has two variations: fixed black out glass, or a sliding opening version depending on your choice. (See photos).
- Total Fitted Dimensions are: 2135mm (W) & 513mm (H)
- Extension Glass dimensions are: 720mm (W) x 513mm (H)
- This fixed version has an internal aluminium window frame (painted black) that will fit inside your window cut-out; then the extension glass is fitted together to cover the entire length of a 110 hardtop rear side panel.
- EXTENSION GLASS: If you choose the sliding opening extension glass, this will feature a similar internal window frame and will sit inside a 2nd smaller cut-out. The fixed version is a blacked out glass sheet bonded straight onto your Defender side panel.
- Innovative and exclusive, future-proof design.
- Features a quality, high-security window locking system.
- Sold as a KIT in PAIRS.
- 70% no-light transmission factory prepared privacy tint.
- E43R approved 4mm toughened safety glass.
- Complies with European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE.
- Reflects heat and reduces glare.
- Premium build quality.
- Leak proof, draft proof.
- Kit includes both sides of glass (4 pieces), primer, a special silicone adhesive, template and fitting instructions.
- Silicone adhesive heat tolerance is minus 40 to plus 90 degrees C.
- Fitted in just a few hours DIY.
- The size of the aperture needed is 1057mm x 427mm - which is the Land Rover standard size for Defender rear side windows.
- Fits all Land Rover Defender 110 2-Door Hardtops (See photos), if you have another type just call and we can discuss.
REAR GLASS NOTE : If you also purchase the Rear Door Glass - carefully remove the existing rear door glass without damaging the rubber - as you will need to re-use the rubber. Carefully remove brake light including brackets from old glass as you will need to glue to new glass.
OPTIONS:
- Extension Glass - Fixed (Blacked out) fitted onto panel, or Sliding (needs a cutout in the side panel to fit)
- Tinted Rear Door Glass - Pre 2002, Post 2002, or Panoramic Version which is compatible with all Defenders.
- Pair of matching Bonded Tinted Quarter Light Windows - With or without.
