Masai® designs & manufactures an exclusive range of high-quality Land Rover Defender enhancement upgrades & parts, e.g. windows, head-linings, roof racks, seat covers, carpets, steps, winch bumpers, lights and much much more. Based in central England with global shipping. Read More.
Internal Window Trims Kit for Land Rover Defender 90/110 - PUMA (07' - 16') - Masai Covered
Internal Window Trims Kit for Land Rover Defender 90/110 - PUMA (07' - 16') - Masai Covered
NOTE: This Defender window trims kit will show as IN STOCK to allow you to order, however there might be a 4-6 week lead time. Your chosen colour choice could be available right away, in that case you will receive within 2-5 working days after making payment. You're welcome to call us and enquire about which colours we have available now.
Spruce up the interior of your Defender PUMA by fitting an internal window trim kit. Including rear side window and quarter light trims - 4 pieces in total - Masai’s internal window trim kit covers the bare metal surrounding the rear side windows and quarter lights.
These kits are supplied pre-covered with fabric to suit most Land Rover interiors, you can match to your headlining, or seats or carpet colours. We think our internal window trim kits look fantastic paired with a set of our interior strip lights, which add a bespoke twist to a utilitarian classic.
- 90 KIT - Rear side window internal trims with seat belt holes AND quarter light internal trims (4 pieces) When upgrading from a hardtop to County Station Wagon you will need to have either use one of our bulkhead reduction kits or cut the trim to bypass the full bulkhead as shown in the photo.
- 110 KIT - Rear Side window internal trims with seat belt holes, quarter light internal trims, 2nd door trim and front door seat belt trim. (8 pieces)
- Included: Fir Tree Clip Adhesive Coverings - We supply a sheet of adhesive fabric with cutouts, that allow you to stick onto the fir trees to match the colour to the Internal trims. (See photo in the thumbnails above) - These come supplied for ALL 9 different colours!
- Manufactured by Masai, covered in high quality fabric used on our new Defender 90/110 Headlinings.
- Made of high-quality GRP.
- Ideal for replacing worn trim kits or converting a panel-van into a County spec.
- Equivalent to official Land Rover part numbers MWC5832LOY, MWC8910LNP, ENV500170LOY, MWC8911LNP
- Fits Puma Land Rover Defenders from 2007 to 2016. (For Forward Facing Seats)
- Top corner radius' is 50mm and bottom corner radius' is 70mm.
- DIY installation. (Fitting service available.)
Download Internal Trim Fitting Instructions.
We highly recommend this extra:
(See "You May Also Like" section below to add any extras to your basket).
Pair of Internal Window Trims Finisher Posts - please pick a colour
Trims Finisher Posts are highly recommended extras to neaten up the edges and fill the gaps. These window trim finisher posts are available as uncovered plastic or covered in the same material and colours as our internal window trim kits and are available for Defender 90 and 110 models up to 2016.
You may also be interested in these optional extras:
Station Wagon conversion retaining clips
If your vehicle is NOT a factory station wagon, and you are converting to a station wagon, then you will need these clips to secure the internal window trims. Land Rover part number MXC3277.
Interior LED Vehicle Strip Lights
Enhance and brighten the interior of your vehicle with low power consumption LED strip lights. Various Sizes and Voltages: 245mm long, 400mm long, or 555mm long. We think our internal window trim kits look fantastic paired with a set of these strip lights, which add a bespoke twist to a utilitarian classic.
Internal grab handle
An internal Grab Handle for Defender headlining (sold in singles) fits above the rear door. It also helps retain the headlining. Genuine Land Rover part no JPC5640LNF.
Welcome to the Masai® eStore. We design and manufacture a wide range of high-quality vehicle upgrades, enhancement accessories and parts for the Land Rover Defender, 90, 110 and 130, particularly glass and windows; but have a look around our website – we also have Defender roof racks, spare wheel carriers, seat covers, side steps, rear steps, lamp guards, Tree Sliders, Winch Bumpers, and LED lights etc.
One of our flagship products is our own-design Masai® Bonded Tinted Panoramic Windows for the Land Rover Defender 90, 110 and 110 2-Door. The dark-tinted toughened glass side panel windows increase your Defender’s privacy, security and value! As featured on exclusive Nene Overland Defender Icons.
Vehicle Lights – LED, Driving Lights and Headlights
We have a large range of premium-quality Driving Lights, Work Lights and Spot Lights. Some are modern low-power-consumption LED Lights, and others are high-luminosity Xenon HID vehicle lights. All lights are harsh environment compliant to IP65 or IP67. Rugged waterproof diecast aluminium housings (some ABS), spot beam and flood beam, various wattages from 15 to 150 and a wide voltage range from 9v to 32v. We also sell NAS LED lights for Land Rover Defenders, clear, coloured and smoked sets for all post 1983 90 and 110, include plinths, E marked (EU approved) and SAE approved. They provide increased visibility (brighter than standard bulbs) and they enhance and modernise the look of your Defender, easy to fit DIY.
