Roof Racks For Land Rovers

Land Rover Defender Roof Racks

We design and manufacture Roof Racks for the Land Rover Defender 90, 110 and Discovery 1 and 2 series – but they may fit other vehicles too – just call us to discuss. Defender Roof Racks are available in three lengths 1.5m, 2.15m and 2.8m. The steel versions have zinc plating and thermoplastic powder coat paint for long life rust protection. Masai Defender Roof Racks are easy to assemble and are supplied with fitting instructions.

We also designed the Masai Defender Flat Roof Racks in 1.5m, 2.15m and 2.8m for Land Rover Defender 90 and 110 – suitable for folding roof tents. The Masai Luggage Roof Racks have a rail that is too high for folding tents, hence why we designed the Masai Flat Roof Racks for Land Rover Defenders. In Spring 2014 we launched our stylish Masai Tubular Roof Racks for Land Rover Defender 90 and 110, and Aluminium Defender Roof Racks are NEW for 2016.

Roof Hatch/ Vent/ Window - (500 x 500 & 970 x 530mm)
+3

Roof Hatch/ Vent/ Window - (500 x 500 & 970 x 530mm)

RH
£306.00
In stock
1
Product Details

Toughened Glass and Aluminium Roof Hatch / Roof Vent / Roof Light

Two sizes: 500x500mm and 970x530mm

This Roof Hatch is suitable for 4x4, horse boxes, mobile exhibition trailer, camper vans, motor home, coach, lorry, bus or any vehicle, porta-cabin, enclosure, etc - where increased light and ventilation is needed but not at the expense of security. Horsebox roof hatch / vent, trailer roof hatch, coach roof hatch light window, motor home roof light.

ADHESIVE: We recommend polymer adhesive and rivets to afix this window. See the item listed below or in the pop-up after you add this window to your cart.

USA and CANADA WARNING: Unfortunately the adhesive we sell cannot be shipped to the USA and Canada, We advise sourcing a suitable 1k polyurethane window bonding adhesive locally, similar in spec to the item listed below.

Roof Hatch / Window Features

  • Black powder coated aluminium frame.
  • Screen printed with dot fading to reduce sunlight glare and reduce heat.
  • E43 4mm single-pane toughened glass.
  • Black EPDM seals
  • Weight: 500x500 7.9kg, 970x530 9.7kg.
  • See photos above for further dimensions.
  • Injection moulded handles.
  • The 970x530 variant only includes an emergency hammer.
  • Provides ventilation gap back, front or both - by way of a sprung scissor mechanism.
  • When closed, the spring mechanism ensures the roof vent is fully sealed against the weather.
  • Available in 500x500mm and 970x530mm variants.
Save this product for later
Display prices in: GBP