Snorkel Kit / Raised Air Intake Kit

snorkel kit  for land rover defender 90 or 110

We sell Land Rover Defender Snorkel Kits (also known as a Raised Air Intake). Snorkels protect engines from the damaging effects of water, dust and sand encountered in touring and off-roading.

Snorkel kit versions for Land Rover Defender 200TDI (left hand fitting kit) and 300TDI, TD5 and TDCI Puma (right hand fitting kit). Snorkel Kits are original Land Rover part number STC50265. For the 300TDI, TD5 and Puma we supply a right-hand bracket.

Roll-cage Snorkel – We also make a Defender Snorkel Kit version for Defenders with roll cages – the lower fitting is different to standard as it protrudes slightly more to accommodate for the position of the roll-cage tubing. The Masai Land Rover Defender Roll Cage Snorkel Kit is available for left hand side 200TDI and right hand 300TDI, TD5 and TDCI Puma.

Headlining / Roof Lining Kit for Land Rover Defender 110 (4pcs Kit)

RHL110-SW-BLK
£1,078.20
In stock
1
Product Details
Manufacturer: Masai
Sold As: 4 Piece Kit + Fittings
Application: Replace old Headlining
Suitable Vehicle: Defender 110 Station Wagon / Hard Top
Colour: 9 Different Colours

Head Lining / Roof Lining KIT for Land Rover Defender 110 Station Wagon / Hardtop (4pcs Kit)

NOTE: This product will remain IN STOCK to allow you to order, however there *may* be a 4-6 week lead time. Your chosen colour choice is most likely available right away, in that case you will receive within 2-5 working days after making payment. You're welcome to call us and enquire about which colours we have available now.

The Roof Lining Kit includes:

  • Front piece (Not for Defenders with a sunroof, although a suitable hole can be easily cut out to accommodate)
  • Middle piece with Alpine window cut-outs
  • Rear piece
  • Telephone piece
  • 20x fir tree clips - to be fitted into the predrilled holes on the headlining for Defender PUMAs, if your Defender is pre 2007, then you will need to make new holes to match the ones in your roof.
  • Fir tree clip adhesive coverings - We supply a sheet of adhesive fabric with cut-outs, that allow you to stick onto the fir trees to match the colour to the headlining. (See photo in the thumbnails above) These come supplied with ALL 10 different colours!
  • (Optional Extras) - Pair of sun visors - Complete new sun-visors covered to match your headlining colour choice.
  • (Optional Extras) - Pair of Alpine window inserts - This is only for Defenders with no alpine windows in the roof. It will cover the gap on the inside of the roof (These can be chosen above in the options and are also listed separately below, where you can read more detail)
  • (Optional Extras) - Pair of windscreen finishers/ A-post trim covers, to match your headlining colour choice.

Our Defender 110 roof linings / headlinings are manufactured by Masai craftsmen; highly experienced in the automotive trimming business. All our NEW roof lining shells are produced exactly to the Land Rover roof lining shape. Made from special GRP, which gives a much better rigidity than the Land Rover thermoplastic biscuit material. This will also provide a much longer lasting roof lining, and will no longer absorb any roof condensation that causes the common problem of sagging over time. Our lining has a plush suede-like finish for that extra touch of style and is hand glued to each individual roof section.

  1. First, remove your old head lining, the telephone piece first, then the back section, the middle section, all interior lights, the sun visors, the rear-view mirror then the front section.
  2. When fitting our head lining, start from the front and work backwards.
  3. Fit the front piece using the fir trees provided in your kit plus interior light.
  4. Fit the middle piece (with alpine cut outs)
  5. Fit the rear piece and interior light.
  6. Fit the telephone piece.

If your existing holes don’t match up with our head lining, then you will need to drill additional holes (I’d suggest you drill the holes in the headlining to match your Defender, instead of drilling in the Defender roof to match our headlining). We purposefully covered all the pre-drilled holes with material for this reason.

Defenders have changed a lot over the years and Land Rovers kept messing with the holes locations!

If you are upgrading your Defender from a Van to a Station Wagon we would recommend that you purchase the interior light as the new roof lining will have a hole cut out for it. The interior light fitting and its bracket will also help secure the roof lining properly.

You may also need a pair of grab handles to help secure the telephone piece above the rear door.

If you would like some help we offer a fitting service for this product, please call us on 01543 254507 for a quote.

Genuine Land Rover Part Numbers. The Land Rover part numbers for the 110 BLACK version are:

  • LR077719 ‚Äì Front Headlining section (No Sunroof cut out);
  • LR063676 ‚Äì Middle Headlining section;
  • LR063679 - Back Headlining section;
  • LR063680 - Telephone Piece
Save this product for later