Snorkel Kit / Raised Air Intake Kit

snorkel kit  for land rover defender 90 or 110

We sell Land Rover Defender Snorkel Kits (also known as a Raised Air Intake). Snorkels protect engines from the damaging effects of water, dust and sand encountered in touring and off-roading.

Snorkel kit versions for Land Rover Defender 200TDI (left hand fitting kit) and 300TDI, TD5 and TDCI Puma (right hand fitting kit). Snorkel Kits are original Land Rover part number STC50265. For the 300TDI, TD5 and Puma we supply a right-hand bracket.

Roll-cage Snorkel – We also make a Defender Snorkel Kit version for Defenders with roll cages – the lower fitting is different to standard as it protrudes slightly more to accommodate for the position of the roll-cage tubing. The Masai Land Rover Defender Roll Cage Snorkel Kit is available for left hand side 200TDI and right hand 300TDI, TD5 and TDCI Puma.

Panoramic Rear Door Glass - Dark Tinted & Heated for Land Rover Defenders 90/110 - (Bonded)

LRD-RDG-PANORAMIC
£302.40
In stock
1
Product Details
Manufacturer: Masai
Application: Rear Door
Suitable Vehicle: Defender 90 & 110

Panoramic Rear Door Glass - Dark Tinted & Heated for Land Rover Defenders 90/110 - (Bonded)

us flag USA and canada flag CANADA CUSTOMERS: We cannot ship this product with the adhesive fitting kit due to customs restrictions. You will need to source your own adhesive. We recommend at least 300ml x 3 of window adhesive to fit the sides and quarter light windows.

  • KIT comes with: 1) Plastic shim for the rear wiper blade hole. (See photo above) 2) Rubber seal to fit around the inside of the door glass aperture (Purely cosmetic). - NOTE: This seal is different for pre and post 2002 rear doors, so please tell us accurately which you have.
  • High quality Masai product.
  • 4mm toughened (tempered) safety glass E43R ‚Äì 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
  • 70% no light transmission high quality factory-prepared dark tint ‚Äì NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
  • Heat reflecting coating, glare reduction glass.

NOTE : Carefully remove brake light from old glass as you will need to glue it to the new glass.

Options

  1. Add a pair of studs to fit high-level brake lights (Land Rover part number AWR4647).
Save this product for later