Sliding Masai Panoramic Tinted Windows for Land Rover Defender 110 4-Door
Masai Panoramic Sliding Bonded Tinted Windows for Land Rover Defender 110 4-Door
Land Rover Defender 110 4-Door Sliding Windows (Opening).
USA / CANADA CUSTOMERS: We cannot ship with the fitting kit due to customs restrictions. You will need to source your own silicone adhesive. We recommend at least 300ml x 3 of silicone to fit the sides and quarter light windows. NOTE: Our Panoramic windows will only fit Defenders POST 1989, due to strengthening bracket behind the front doors.
A Masai® flagship product.
Panoramic Defender 110 Side Windows come as a PAIR, as do quarter light windows.
Our Kit comes with: Würth primer, silicone adhesive, cleaning wipes and primer applicator, a paper template to cut out side apertures / quarters and fitting instructions booklet.
Additionally: One extra tube of silicone is provided if you order Quarters, and one further extra silicone tube if you order a Panoramic rear door glass.
Innovative and exclusive, future-proof design.
Increases resale value of your Defender.
Masai Panoramic Defender windows include an aluminium inner frame for aesthetics (see thumbnail photos on the right) - Copycat competitors do not.
Use to replace standard Land Rover Defender side windows, part numbers: MUC3766 superseded by MWC4734, MUC3767 superseded by MWC4735.
SIDE PANEL DIMENSIONS: 1320mm x 520mm (Length x Height)
APERTURE CUTOUT DIMENSIONS: 1057mm x 427mm (Length x Height) - This is the standard Land Rover cut out size for Defender rear side windows.)
Want to know more about Masai Panoramic windows? CLICK HERE.
Want to know how our windows suit various body colours? CLICK HERE.
See more photos of Masai Panoramic windows fitted to various Defenders CLICK HERE.
With or without matching pair of Rear Tinted Bonded Quarter Lights. (Either 30cm or 31cm length - Standard/Maxi)
With or without Heated Tinted Rear Door Glass (Either Pre 02, Post 02 or Panoramic).
REAR DOOR GLASS NOTE :If you purchase the rear door glass too - (Post 2002 ONLY) Carefully remove existing rear door glass without damaging the rubber - as you will need to re-use it. Carefully remove brake light including brackets from old glass as you will need to glue to new glass.
NOTE: REAR QUARTER LIGHTS: The Maxi version is now supplied which is 1cm wider than before and takes the quarterlight glass right to the edge of the vehicle. (You will need to fill the edge joint with the silicone sealant provided).