Land Rover Defender Upgrades & Accessories

XJS and XJ6 Jaguar Water Pump - XJ12 Series III and XJS V12 - JLM10819

SKU JLM10819
£96.00
Out of stock
1
Product Details

XJS and XJ6 Jaguar Water Pump - XJ12 Series III and XJS V12

  • This is a Jaguar Water Pump - Part No. JLM 10819
  • Complete with Gasket (Part No.EAC 9630)
  • Incorporating the Single-Vee Pulley (Part No.C 37817)
  • Applications: Jaguar XJ12 Series III 5.3 Litre (All cars), Jaguar XJS 5.3 & 6.0 Litre V12 from Chassis Number (VIN) 139052 up to Chassis Number (VIN) 226645.

This is the genuine Jaguar Original Equipment pump. This means that the pump components have been made to original Jaguar drawings and conform with all material and dimensional specifications. All castings are leak-tested prior to final assembly. The components are assembled to specification (exacting tolerances determined by Jaguar) e.g. pulleys are assembled to the correct height to minimise drive belt wear. Impellers are assembled to the correct height to ensure optimum performance and avoid a potentially disastrous foul condition. Bearings and seals are designed to withstand loads and forces prescribed by Jaguar as a result of exhaustive testing under extreme conditions. Assembly processes use load-monitoring to ensure components will not fail prematurely.

The life of a replacement OEM pump can, however, be adversely affected if the car's cooling system is not maintained. Before fitting a replacement pump, it is highly advisable to flush the cooling system under pressure, to clear accumulated debris within the system which can damage the pump if circulated. After the replacement pump has been fitted, the cooling system should be topped up to the correct level with the prescribed proportion of anti-freeze added. Anti-freeze is essential under all temperature conditions as it contains properties which lubricate the water pump seal. Not only does it prevent the coolant from freezing in extreme cold conditions, but it prevents the coolant from boiling in extreme heat.

Save this product for later

Land Rover Defender 110 4 door

Land Rover Defender Upgrades, Enhancement Accessories and Parts

Welcome to the Masai® eStore (www.masai4x4.com). We design and manufacture a wide range of high-quality vehicle upgrades, enhancement accessories and parts for the Land Rover Defender, 90, 110 and 130, particularly glass and windows; but have a look around our website – we also have Defender roof racks, spare wheel carriers, seat covers, side steps, rear steps, lamp guards, Wing Mirrors, Tree Sliders, Winch Bumpers, etc.

One of our flagship products is our own-design Masai® Bonded Tinted Panoramic Windows for the Land Rover Defender, 90 and 110. The dark-tinted toughened glass side panel windows increase your Defender’s privacy, security and value! As featured on exclusive Nene Overland Defender Icons.

Vehicle Lights – LED and Xenon HID Lights

We have a large range of premium-quality Driving Lights, Work Lights and Spot Lights. Some are modern low-power-consumption LED Lights, and others are high-luminosity Xenon HID vehicle lights. All lights are harsh environment compliant to IP65 or IP67. Rugged waterproof diecast aluminium housings (some ABS), spot beam and flood beam, various wattages from 15 to 150 and a wide voltage range from 9v to 32v. We also sell NAS LED lights for Land Rover Defenders, clear, coloured and smoked sets for all post 1983 90 and 110, include plinths, E marked (EU approved) and SAE approved. They provide increased visibility (brighter than standard bulbs) and they enhance and modernise the look of your Defender, easy to fit DIY.