We manufacture and sell dark tinted and silicone bonded Blind Spot Side Windows for panel sided Land Rover Defenders. These very attractive and unique windows are typically sold in pairs – offside and nearside, and not only provide extra visibility but they look great too. They have a 70% no-light transmission dark privacy tint. The tint is factory-prepared – the glass is actually tinted and NOT a stuck on film which can peel off.
WHY NOT GET TWO PAIRS? – Also available as the Masai Tinted Double Side Windows for Land Rover Defenders.
They are easily fitted DIY. View and print the Land Rover Defender Masai Blind Spot Window Fitting Instructions.
Our blind spot side windows are made using E43R toughened safety glass – Masai Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms.
Fitting to OTHER TYPES OF VEHICLES – If you have a panel sided van or other type of vehicle or enclosure you may also be able fit our bonded tinted blind spot windows – call us if in any doubt.
Panoramic Rear Door Glass - Dark Tinted & Heated for Land Rover Defenders 90/110 - (Bonded)
Panoramic Rear Door Glass - Dark Tinted & Heated for Land Rover Defenders 90/110 - (Bonded)
USA and 
CANADA CUSTOMERS: We cannot ship this product with the adhesive fitting kit due to customs restrictions. You will need to source your own adhesive. We recommend at least 300ml x 3 of window adhesive to fit the sides and quarter light windows.
- KIT comes with: 1) Plastic shim for the rear wiper blade hole. (See photo above) 2) Rubber seal to fit around the inside of the door glass aperture (Purely cosmetic). - NOTE: This seal is different for pre and post 2002 rear doors, so please tell us accurately which you have.
- High quality Masai product.
- 4mm toughened (tempered) safety glass E43R‚Äö 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
- 70% no light transmission high quality factory-prepared dark tint NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
- Heat reflecting coating, glare reduction glass.
NOTE : Carefully remove brake light from old glass as you will need to glue it to the new glass.
Options
- Add a pair of studs to fit high-level brake lights (Land Rover part number AWR4647).
