We design and manufacture Land Rover Defender Differential Guards. Diff guards protect vehicle differentials from rock and tree root damage, etc. Fits all standard Land Rover axles front or rear – all Defenders 90, 110, 130, series II/III, Discovery and Range Rover Classic. We have Heavy Duty 5mm thick versions and standard 3mm versions – although we are now only selling the 3mm on eBay, and the 5mm here.
High tensile carbon steel with high quality zinc galvanised plating. High strength construction with superior clean welding laser-cut. Very easy to fit without any drilling, and it can be transferred to other vehicles. The kits include two 8 mm x 70 mm cylindrical allen key bolts with heavy gauge zinc plating and two self-locking nuts with nylon inserts.
Rear Door Glass - Dark Tinted & Heated for Pre 02' Land Rover Defenders 90/110 - (Bonded)
Rear Door Glass - Dark Tinted & Heated for Pre 02' Land Rover Defenders 90/110 - (Bonded)
This replacement Rear Door Glass is BONDED to the inside of the rear door, suitable for doors that are flat at the bottom of the aperture. As shown in the photo above. Usually Defenders Pre-2002, but you may have fitted a newer door so make sure to double check.
USA and 
CANADA CUSTOMERS: We cannot ship optional adhesive due to customs restrictions. You will need to source your own window adhesive. We use the Adhesive and Primer Kit listed here.
- Standard size replacement. (Original Part Number: LR042729)
- High quality Masai product.
- 4mm toughened (tempered) safety glass E43R‚Äö 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
- 70% no light transmission high quality factory-prepared dark tint‚Äö NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
- Heat reflecting coating, glare reduction glass.
Options
- Add Adhesive Sealant for Pre 2002 Defenders only.
- Add a pair of studs to fit high-level brake lights (Land Rover part number AWR4647).
