Puma Bonnets

Puma Bonnets for Land Rover Defender

Puma Bonnet for Land Rover Defender

  • Suitable for all Defenders from 200tdi to Puma models.
  • We have both genuine OEM Land Rover Puma Bonnets made of aluminium (part number BKA710140), and cheaper aftermarket versions – both standard and reinforced.
  • The aftermarket version Land Rover Defender Puma Bonnet is made of GRP – Glass Reinforced Plastic with steel fixtures for original fasteners; it is durable and flexible for heavy use. It is light-weight compared to original aluminium Defender bonnets – the net weight is 10KG. Noise transmission is much less than the OEM aluminium version. It will reduce the engine noise.
  • NOTE : Both types are unfinished – meaning they require some filling, primer and top coats of paint.
Slide Opening version
+3

Masai Zeppelin Dark Tinted Windows for Land Rover Defender 90 / 110

MZepp-F
£583.20
In stock
1
Product Details
Manufacturer: Masai
Suitable Vehicle: Defender 90 / 110
Colour: 70% Dark Tint

Masai Zeppelin Dark Tinted Windows for Land Rover Defender 90 / 110 - pair

A Masai® flagship product and similar to the original Masai Panoramic Defender Windows only there is less glass and the corners are rounded, we've also designed matching round-cornered quarter light windows too, see the thumbnail photos, you can purchase those below.

  • Two versions - Locking sliding windows OR Fixed windows with no opening.
  • Both Fixed and Sliding have an aluminium black powder-coated frame attached and it sits in the aperture of the side of your Defender.
  • The radius curves of the Zeppelin windows internal frame is 50/50 degrees. See our aperture guide in the thumbnails. If you have a post 2004/05 Defender with Land Rover windows fitted, they have a 50/70 radius aperture, you will need to slightly trim the bottom two curves to be 50 degrees to fit.
  • The price is for a PAIR - offside and nearside.
  • Innovative and exclusive, future-proof design.
  • Increase security of your vehicle.
  • Increases resale value of your vehicle.
  • 70% no-light transmission factory prepared privacy tint.
  • E43R approved 4mm toughened safety glass.
  • European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE.
  • Reflects heat and reduces glare.
  • Premium build quality.
  • Leak proof, draft proof.
  • Kit includes primer, a special window adhesive (not USA nor Canada), template and fitting instructions.
  • Silicone adhesive heat tolerance is minus 40 to plus 90 degrees C.
  • Fitted in just a few hours DIY.
  • Windows Fitting Service available - just call us.
  • Fits all Land Rover Defenders, if you have another type of vehicle just call and we can discuss.
  • Use to replace standard Land Rover Defender side windows, part numbers: MUC3766 superseded by MWC4734, MUC3767 superseded by MWC4735.

Cost Options:

  • Side Windows Type - Fixed or Lockable Slide Opening.
  • Bonded Tinted Quarter Light Glass - With or without matching pair of Zeppelin Rear Tinted Bonded Quarter Lights.
  • Tinted Rear Door Glass - With or without heated tinted Rear Door Glass (Pre and Post 2002 versions).

REAR GLASS NOTE : If you purchase the rear glass too - Carefully remove existing rear door glass without damaging the rubber - as you will need to re-use it. Carefully remove brake light including brackets from old glass as you will need to glue to new glass.

us flag USA and canada flag CANADA CUSTOMERS: We cannot ship adhesive to USA and Canada due to customs restrictions. You will need to source your own window adhesive. We recommend at least 600ml of window adhesive to bond these side windows.

Save this product for later
Display prices in: GBP