Suitable for all Defenders from 200tdi to Puma models.
We have both genuine OEM Land Rover Puma Bonnets made of aluminium (part number BKA710140), and cheaper aftermarket versions – both standard and reinforced.
The aftermarket version Land Rover Defender Puma Bonnet is made of GRP – Glass Reinforced Plastic with steel fixtures for original fasteners; it is durable and flexible for heavy use. It is light-weight compared to original aluminium Defender bonnets – the net weight is 10KG. Noise transmission is much less than the OEM aluminium version. It will reduce the engine noise.
NOTE : Both types are unfinished – meaning they require some filling, primer and top coats of paint.
+3
Panoramic Rear Door Glass - Dark Tinted & Heated for Land Rover Defenders 90/110 - (Bonded)
LRD-RDG-PANORAMIC
£302.40
In stock
1
Product Details
Manufacturer:Masai
Application:Rear Door
Suitable Vehicle:Defender 90 & 110
Panoramic Rear Door Glass - Dark Tinted & Heated for Land Rover Defenders 90/110 - (Bonded)
USA and CANADA CUSTOMERS: We cannot ship this product with the adhesive fitting kit due to customs restrictions. You will need to source your own adhesive. We recommend at least 300ml x 3 of window adhesive to fit the sides and quarter light windows.
KIT comes with: 1) Plastic shim for the rear wiper blade hole. (See photo above) 2) Rubber seal to fit around the inside of the door glass aperture (Purely cosmetic). - NOTE: This seal is different for pre and post 2002 rear doors, so please tell us accurately which you have.
High quality Masai product.
4mm toughened (tempered) safety glass E43R‚Äö 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
70% no light transmission high quality factory-prepared dark tint NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
Heat reflecting coating, glare reduction glass.
NOTE : Carefully remove brake light from old glass as you will need to glue it to the new glass.
Options
Add a pair of studs to fit high-level brake lights (Land Rover part number AWR4647).