Rear Door and Quarter Light Windows

These Defender rear windows have been designed as standard size replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. Land Rover Defender rear door glass is easy to fit if you know a bit about DIY. Fitting service also available – just call.

Our Defender rear windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms. The dark tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.

Masai 7mm 3-in-1 Sound Deadening with Foam Insulation Sheet (35cm x 50cm)

MSD-7x350x500
£14.40
2mm black Butyl, 5mm closed cell rubber foam, aluminium foil and adhesive
In stock
1
Product Details

Masai 7mm 3-in-1 Sound Deadening with Foam Insulation Sheet

2mm Butyl + 5mm foam = 7mm total thickness (including aluminium foil sheet)

Sold by the sheet for your flexibility.

These particular sheets are 7mm thick and measure 350mm x 500mm (13.78" x 19.7"), which means 5.7 of these sheets cover one square metre.

Made with 2mm black Butyl, 5mm closed cell rubber foam, aluminium foil and strong adhesive with peel off backing. Soft and flexible.

If you want you can utilise this 7mm sheet and our other sheets in 2mm and 3mm in different parts of your vehicle to suit requirements and budget.

FITTING: Simply clean and degrease the areas to be covered, cut the sheets to the shapes required, peal off the protective sheet and apply in all the various places required to suit your needs. The removable backing sheet includes cutting gridlines. For purely sound-dampening you don't need to cover every square inch, the objective is to cover panel areas that can resonate or rattle.

APPLICATIONS: Ideal for insulating and removing unwanted sound in the roof, doors, footwells, wheel arches, side panels. Also helps with internal moisture control. As it is 7mm thick you may have an issue if trying to fit under certain carpeted areas and in certain areas behind door cards.

Masai Sound Deadening and Insulation sheets provide solutions to multiple issues :

  • Improve the thermal efficiency of your vehicle - so warmer in winter, cooler in summer.
  • Reduce the resonance, rattles, vibration and noise level from outside, i.e. from the road, tyres, exhaust, engine.
  • Improve the sound quality produced by your audio device's speakers.

Fits all kinds of vehicles: cars, trucks, coaches, tractor cabs, buses, caravans, camper vans, etc.

This 7mm 3-in-1 sheet (including foam) is ideal for lining vehicle roofs and doors, but can be used anywhere if clearance allows.

We also sell thinner 2mm and 3mm sheets, if you have certain areas that cannot accommodate 7mm sheet.

For Land Rover Defenders use our guide below for how many sheets you need. These quantities are GUIDANCE ONLY, feel free to order a few more or a few less.

Area to be covered Def 90 Def 110 Crew Cab Single Cab
Roof 18 24 15 8
Front Footwells 6 6 6 7
Rear Footwell - 5 5 -
Seatbox (Inside/Outside) 4 / 5 4 / 5 4 / 5 4 / 5
Front Doors (pair) 4 4 4 4
2nd Row Doors (pair) 4 2 2 4
Rear Door 1 1 - -
Rear Tub (Floor / Arches) 8 / 9 8 / 9 - -
Bulkhead Behind Seats (Front) 5 - 5 (2nd row) 5
Bulkhead Behind Seats (back) 5 2 - -
Bulkhead (Engine Bay)
Rebuilding from scratch
5 for sides
2 for tunnel
5 for sides
2 for tunnel
5 for sides
2 for tunnel
5 for sides
2 for tunnel
Side & Rear Panels (No windows) PER SIDE 5 5 - -
Bonnet 8 8 8 8
Save this product for later