Land Rover Defender Roof Racks
We design and manufacture Roof Racks for the Land Rover Defender 90, 110 and Discovery 1 and 2 series – but they may fit other vehicles too – just call us to discuss. Defender Roof Racks are available in three lengths 1.5m, 2.15m and 2.8m. The steel versions have zinc plating and thermoplastic powder coat paint for long life rust protection. Masai Defender Roof Racks are easy to assemble and are supplied with fitting instructions.
We also designed the Masai Defender Flat Roof Racks in 1.5m, 2.15m and 2.8m for Land Rover Defender 90 and 110 – suitable for folding roof tents. The Masai Luggage Roof Racks have a rail that is too high for folding tents, hence why we designed the Masai Flat Roof Racks for Land Rover Defenders. In Spring 2014 we launched our stylish Masai Tubular Roof Racks for Land Rover Defender 90 and 110, and Aluminium Defender Roof Racks are NEW for 2016.
Panoramic Rear Door Glass - Dark Tinted & Heated for Land Rover Defenders 90/110 - (Bonded)
Panoramic Rear Door Glass - Dark Tinted & Heated for Land Rover Defenders 90/110 - (Bonded)
USA and 
CANADA CUSTOMERS: We cannot ship this product with the adhesive fitting kit due to customs restrictions. You will need to source your own adhesive. We recommend at least 300ml x 3 of window adhesive to fit the sides and quarter light windows.
- KIT comes with: 1) Plastic shim for the rear wiper blade hole. (See photo above) 2) Rubber seal to fit around the inside of the door glass aperture (Purely cosmetic). - NOTE: This seal is different for pre and post 2002 rear doors, so please tell us accurately which you have.
- High quality Masai product.
- 4mm toughened (tempered) safety glass E43R‚Äö 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
- 70% no light transmission high quality factory-prepared dark tint NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
- Heat reflecting coating, glare reduction glass.
NOTE : Carefully remove brake light from old glass as you will need to glue it to the new glass.
Options
- Add a pair of studs to fit high-level brake lights (Land Rover part number AWR4647).
