Roof Racks For Land Rovers

Land Rover Defender Roof Racks

We design and manufacture Roof Racks for the Land Rover Defender 90, 110 and Discovery 1 and 2 series – but they may fit other vehicles too – just call us to discuss. Defender Roof Racks are available in three lengths 1.5m, 2.15m and 2.8m. The steel versions have zinc plating and thermoplastic powder coat paint for long life rust protection. Masai Defender Roof Racks are easy to assemble and are supplied with fitting instructions.

We also designed the Masai Defender Flat Roof Racks in 1.5m, 2.15m and 2.8m for Land Rover Defender 90 and 110 – suitable for folding roof tents. The Masai Luggage Roof Racks have a rail that is too high for folding tents, hence why we designed the Masai Flat Roof Racks for Land Rover Defenders. In Spring 2014 we launched our stylish Masai Tubular Roof Racks for Land Rover Defender 90 and 110, and Aluminium Defender Roof Racks are NEW for 2016.

Rear Door Glass - Dark Tinted & Heated for Pre 02' Land Rover Defenders 90/110 - (Bonded)

LRD-RDG-PRE2002
£162.00
In stock
1
Product Details
Manufacturer: Masai
OEM Part No: LR042729
Application: Rear Door Glazing
Suitable Vehicle: Defender 90 & 110

Rear Door Glass - Dark Tinted & Heated for Pre 02' Land Rover Defenders 90/110 - (Bonded)

This replacement Rear Door Glass is BONDED to the inside of the rear door, suitable for doors that are flat at the bottom of the aperture. As shown in the photo above. Usually Defenders Pre-2002, but you may have fitted a newer door so make sure to double check.

us flag USA and canada flag CANADA CUSTOMERS: We cannot ship optional adhesive due to customs restrictions. You will need to source your own window adhesive. We use the Adhesive and Primer Kit listed here.

  • Standard size replacement. (Original Part Number: LR042729)
  • High quality Masai product.
  • 4mm toughened (tempered) safety glass E43R‚Äö 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
  • 70% no light transmission high quality factory-prepared dark tint‚Äö NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
  • Heat reflecting coating, glare reduction glass.

Options

  1. Add Adhesive Sealant for Pre 2002 Defenders only.
  2. Add a pair of studs to fit high-level brake lights (Land Rover part number AWR4647).
Save this product for later