Side Windows for Land Rover Defender

Side Windows for Land Rover Defender

We manufacture and sell replacement sliding side windows for the Land Rover Defender in pairs – offside and nearside. Clear, green or dark tinted Defender privacy windows. They are standard size replacements – Land Rover part numbers MUC3766 superseded by MWC4734, and MUC3767 superseded by MWC4735, and the kits include a new rubber seal/trim.

We also now sell “double” side sliding windows for the Defender. Two sets of Land Rover catches are fitted to these deluxe double side sliding windows – so the window can be opened from both ends. This NEW type is ideal when travelling with children, extra passengers and pets in the back of your Defender.

810mm x 477mm Camper Style Side Window - DARK tint
+3

810mm x 477mm Camper Style Side Window - DARK tint

DEF810x477
£318.00
In stock
1
Product Details

810mm Camper Style Side Window - DARK tint for HARD-TOP Land Rover Defender and other vehicles


Variety of uses where increased access, light and ventilation is needed but not at the expense of security.

This version is narrower than "standard sized" Land Rover Defender side windows and so cannot be used as a direct replacement - only for use as a Hard-top conversion.

Our other wider version DEF1107x477 Camper-Style Side window - IS DESIGNED as a "standard sized" Land Rover Defender side window replacement.

Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the aperture.

Once you have cut the correct shaped aperture, you will need rivets and silicone sealant to attach the window.

If you need it completely wide open the gas strut brackets can be unscrewed from the frame.

Originally designed for use on the side of a vehicle, however it can also be used on the roof of a vehicle as a sun roof, in this case the drain holes must be blocked with silicone sealant.

  • SOLD as SINGLE WINDOWS (Price is NOT for a pair)
  • Includes two Gas Struts for smooth opening and closing
  • Two handle locking with keys
  • The maximum amount these windows open is as seen in the above photo and is 200mm from the vehicle body.
  • Measurements: 810mm x 477mm external max
  • The size of the aperture needed is 760mm x 427mm (this is smaller than Land Rover Standard).
  • The internal area is 720mm x 387mm (see diagram)
  • The Radius of the cut out aperture needs to be 76mm
  • Black powder-coat painted aluminium frame
  • Made to original Land Rover quality - BUT they do not rattle or leak
  • Standard size replacement
  • Includes rubber seal and internal bezel
  • E43 4mm toughened safety glass
  • 70% No-Light transmission Dark Tint
  • Factory prepared tint - not a stuck on film
  • Easy to fit DIY
  • Fitting service also available - just call

Can be fitted to the side of:

  • Land Rovers and other 4x4
  • Other Shooting/Leisure vehicles
  • Trucks with Sleeping Pods
  • Coaches and Lorries
  • Containers/Sheds in Gardens
  • Horseboxes
  • Motor Caravans / Motor Home
  • Towed Caravans
  • Mobile Exhibition Trailer
  • Porta-cabins / Mobile Buildings / Other Enclosure
  • Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss

Download ......Masai Defender side windows Fitting Instructions

These fitting instructions are NOT actually for this specific window but the principles are the same. Be very careful to cut the exact shape aperture needed. This window is not the "Standard size" Landy window.

Recommended optional extra, purchase below

  • Adhesive and rivet kit
Save this product for later
Display prices in: GBP

Our Defender windows have been designed as replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. They are easy to fit if you know a bit about DIY, you will need a drill and a rivet gun. A template is available as an optional extra. The size of the aperture needed is 1057mm x 427mm – which is the Land Rover standard size for Defender rear side windows. Fitting service also available – just call.

We manufacture to original Land Rover quality using original shape Land Rover aluminium profile and locks/catches. Our windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms.

Many old windows rattle, leak and are draughty – our replacement land rover defender windows will solve that – in addition if you order the tinted versions you will be reducing glare and reflecting some of the heat on a hot day. The tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.