We design and manufacture high quality Side Steps and Rear Steps for the Land Rover Defender 90 and 110 – may fit other models too – just call. Folding Side Steps and Rear Steps mounted near towing point.
We also have the Land Rover Defender NAS Rear Step made of zinc plated galvanised steel, black powder coated complete with aluminium tread plate, holes for fitting a towing hook and accommodation for electrical sockets.
Our “Fire and Ice” style Defender Tubular Side Steps feature an attractive “Masai” branded tread plate made of rubber and brushed aluminium. It attaches with bolts and no drilling is required. Clamps to the chassis outriggers. All our steps are easy to fit DIY (instructions supplied).
For touring we designed a Wheel Step which fits most 4×4 wheels – it can be used as a viewing platform, seat or to assist in gaining access to your roof rack and engine. See video above.
DYNAMAT Xtreme, Bulk Pak, 9 sheets - Sound Vibration and Insulation - 457mm x 812mm (36ft²)
DYNAMAT Xtreme, Bulk Pak, 9 sheets - Sound Vibration and Insulation - 451mm x 812mm (36ft²)
Create a solid, luxury car feel with incredible sound.
Advice:
- The 9 sheets included in this box is just enough to cover the whole roof of a Defender 110. 7 sheets are needed to do the roof on a Defender 90 and 6 sheets for a Crew Cab,you can use any leftover on doors etc.
DYNAMAT Xtreme is the highest efficiency energy conversion, sound deadener available on the market today! Xtreme is a self-adhesive, elastomeric “space age” synthetic rubber with a heavy 4mm aluminium constraining layer. The super sticky rubber and heavy aluminium stretches and contours better than any other product on the market.
Main Benefits:
- Reduce road noise.
- Stop Resonance, vibrations, buzzles and rattles.
- Hear music as its meant to be heard, better bass, reduced speaker distortion.
DYNAMAT Xtreme is a black butyl based core with 4 mil aluminum constrain layer, and craft paper release liner. It is used to line the panels and bonnet of vehicles to reduce sound and vibration.
- Contents: (9x Sheets) 18″x 32″ (457mm x 812mm) pieces of Dynamat Xtreme.
- Total sheet coverage: 36 ft² (3.34m²).
- Weight per sheet: 1kg.
- Thickness: 1/16".
- Application: Doors, floor, bonnet, the boot and the roof.
- Official Product Page: http://www.dynamat.com/dynamat-xtreme-bulk-pak/
Fitting Service
Call for a quote for - Complete Vehicle Fitting, Doors, Roof Lining, Back of Vehicle.
Overview of Sound, Heat and Vibration Insulation with DYNAMAT
Our much-loved Defenders can be on the noisy side at times; however, the good news is that this can be alleviated. There are no quick fixes and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive.
At Masai, we use and recommend DYNAMAT sound proofing products which provide the absolute best result than other alternatives on the market. DYNAMAT has been made in the USA for the past 20 years.
Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.
Masai offer three main DYNAMAT products:
- DYNAMAT Xtreme - Sound Deadener.
- Dynaliner - Thermal Insulator (Good for the roof)
- DYNAMAT Hoodliner - Sound Soaker foam (For under the bonnet)
We recommend a combination of DYNAMAT Extreme and Dynaliner, or all three.
DYNAMAT Xtreme and Dynaliner both reduce heat and noise. DYNAMAT is best for reducing noise, but also reduces heat, Dynaliner is best for heat, but also reduces noise. A combination of the two as recommended provides you with great thermal resistance for a super cool, quiet, solid drive.
The Final Result
Vast improvements will be noticeable straight away in the quality of drive. Noise, vibrations and rattles will be significantly reduced within the vehicle. You’ll hear more from your music, and achieve better, clearer bass. Insulation will help reduce heat loss via the roof, however your vehicle will also be cooler in the summer.
Installation Guide:
Use a pair of scissors or razor knife to cut DYNAMAT to the desired size and shape before removing the release liner. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place. The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary.
DYNAMAT Xtreme Description:
DYNAMAT is a patented, lightweight elastomeric butyl and aluminum constrained-layer vibration damper. DYNAMAT conforms and fuses easily to sheet metal and other hard substrates. Material performance is optimized for temperature ranges between 14°F and 140°F (- 10°C to +60°C). Material can withstand temperature extremes between -65°F and +300°F (-54°C to +149°C) and is highly resistant to aging.
Discover the DYNAMAT Difference:
You want to consider several things when you compare DYNAMAT to other materials. DYNAMAT exceeds other materials because of proprietary VECTOR™ Chemistry and damps better at an extended higher temperature range. DYNAMAT does not absorb moisture and is not affected by oil. Its elastometric “space age” synthetic rubber will stay intact under foot and sticks to overhead, vertical and oily surfaces. It is much easier to do a better job with DYNAMAT’s larger sheets of 3, 4 and 8 square feet while imitators can have less than 2 square feet. DYNAMAT is and has been made in the USA for over 20 years. We guarantee it!
