Headlining / Roof Lining KIT for Land Rover Defender 90 Station Wagon / Hardtop

NOTE: This product will remain IN STOCK to allow you to order, however there *may* be a 4-6 week lead time. Your chosen colour choice is most likely available right away, in that case you will receive within 2-5 working days after making payment. You're welcome to call us and enquire about which colours we have available now.

The Roof Lining Kit includes:

• Front Piece (Not for Defenders with a sunroof, although a suitable hole can be easily cut out to accommodate)
• Rear Piece (LH and RH)
• Connector Strip for Rear - to cover the join
• Rear Telephone Piece
• 20x Fir Tree Clips - to be fitted into the predrilled holes on the headlining for Defender PUMAs, if your Defender is pre 2007, then you will need to make new holes to match the ones in your roof.
• Fir Tree Clip Adhesive Coverings - We supply a sheet of adhesive fabric with cut-outs, that allow you to stick onto the fir trees to match the colour to the headlining. (See photo in the thumbnails above) - These come supplied for ALL 10 different colours!
• (Optional Extra) - Pair of Sun Visors - Complete new sunvisors covered to match your headlining colour choice.
• (Optional Extra) - Pair of Alpine Window Inserts - This is only for Defenders with no alpine windows in the roof. It will cover the gap on the inside of the roof.
• (Optional Extra) - Pair of Windscreen Finishers/ A-Post Trim Covers to match your headlining colour choice.

Our Defender 90 roof linings / headlinings are manufactured by Masai craftsmen; highly experienced in the automotive trimming business. All our NEW roof lining shells are produced exactly to the Land Rover roof lining shape. Made from special GRP, which gives a much better rigidity than the Land Rover thermoplastic biscuit material. This will also provide a much longer lasting roof lining, and will no longer absorb any roof condensation that causes the common problem of sagging over time. Our lining has a plush suede-like finish for that extra touch of style and is hand glued to each individual roof section.

1. First, remove your old head lining, the telephone piece first, then the back section and interior lights, the sun visors, the rear-view mirror then the front section.
2. When fitting our head lining, start from the front and work backwards.
3. Fit the front piece using the fir trees provided in your kit.
4. Fit the left hand and right side pieces in the back the same way.
5. Fit the telephone piece.
6. Fit the metal strip provided that covers the split down the middle of the rear section.

If your existing holes don’t match up with our head lining, then you will need to drill additional holes (I’d suggest you drill the holes in the headlining to match your Defender, instead of drilling in the Defender roof to match our headlining). We purposefully covered all the pre-drilled holes with material for this reason.

Defenders have changed a lot over the years and Land Rovers kept messing with the holes locations!

If you are upgrading your Defender from a Van to a Station Wagon we would recommend that you purchase the interior light as the new roof lining will have a hole cut out for it. The interior light fitting and it's bracket will also help secure the roof lining properly.

You may also need a pair of grab handles to help secure the telephone piece above the rear door.

If you would like some help, we offer a fitting service for this product, please call us on 01543 254507 for a quote.

Genuine Land Rover Part Numbers

The original Land Rover part numbers for the BLACK version are as follows:

• LR077717 - Front Headlining section (No Sunroof cut out)
• LR063678 - Back Headlining section
• LR063680 - Telephone Piece