We design and manufacture high quality Side Steps and Rear Steps for the Land Rover Defender 90 and 110 – may fit other models too – just call. Folding Side Steps and Rear Steps mounted near towing point.
We also have the Land Rover Defender NAS Rear Step made of zinc plated galvanised steel, black powder coated complete with aluminium tread plate, holes for fitting a towing hook and accommodation for electrical sockets.
Our “Fire and Ice” style Defender Tubular Side Steps feature an attractive “Masai” branded tread plate made of rubber and brushed aluminium. It attaches with bolts and no drilling is required. Clamps to the chassis outriggers. All our steps are easy to fit DIY (instructions supplied).
For touring we designed a Wheel Step which fits most 4×4 wheels – it can be used as a viewing platform, seat or to assist in gaining access to your roof rack and engine. See video above.
Heated Windscreen Wiring Kit with Switch for Land Rover Defender
You can retro fit a heated windscreen into your Defender using this wiring kit, and we offer two versions depending on the age of your Defender.
- Available with a genuine Land Rover OEM switch suitable for TD5 and Puma (2002-2016) (part number YUG000460LNF and female connector YPC10524), or a Carling Contura switch suitable for earlier dash boards (Pre 2002) - (requires mounting).
- The third option, rocker type switch is for earlier Defenders (200TDi, 300TDi & early TD5s) with no space in the dash area for carling switches. See photos above. The switch fits to the right of the steering wheel underneath the instruments panel.
- The rocker type switch wiring kit can also be connected to heated wing mirrors as well. It is on a 10 minute timer once activated. But can be manually switched off as well.
- Land Rover Defender Windscreen Wiring Harness kit suitable for windscreens with 2 tab wires on each corner.
- Kit requires minimal connections such as positive and negative power, ignition, live and illumination live.
- Rated at 20A with a 10 minute timer relay and suitable for Land Rover heated windscreen part number CMB000411 or equivalent.
- Comes with 500mm power cable from relay to battery. Battery end connection is fitted with a M8 ring terminal.
- Heated screen supply cable is 3m long from relay to the screen terminals with insulated female spade.
- Screen earth cable is 500mm and has a female spade and M8 ring terminal.
Download Heated Windscreen Wiring Instructions.
