Side Steps and Rear Steps

We design and manufacture high quality Side Steps and Rear Steps for the Land Rover Defender 90 and 110 – may fit other models too – just call. Folding Side Steps and Rear Steps mounted near towing point.

We also have the Land Rover Defender NAS Rear Step made of zinc plated galvanised steel, black powder coated complete with aluminium tread plate, holes for fitting a towing hook and accommodation for electrical sockets.

Our “Fire and Ice” style Defender Tubular Side Steps feature an attractive “Masai” branded tread plate made of rubber and brushed aluminium. It attaches with bolts and no drilling is required. Clamps to the chassis outriggers. All our steps are easy to fit DIY (instructions supplied).

For touring we designed a Wheel Step which fits most 4×4 wheels – it can be used as a viewing platform, seat or to assist in gaining access to your roof rack and engine. See video above.

Nudge Bar (A Bar / A Frame) for Off-roading Land Rover Defenders

MAS-37-N-BAR
£108.00
In stock
1
Product Details
Manufacturer: Masai

Nudge Bar (A-Bar / A-Frame) for Off-roading Land Rover Defenders

NOTE: This nudge bar has been designed to fit Air Con and Non Air Con vehicles without further modification and slimline lights, however some front grilles (such as the SVX style grille) require the extension brackets for which will give an addition 50mm of clearance. Additionally, if you going to be fitting large depth lights (such as HID lights) you will need the light extension brackets. Both of these two sets of optional brackets, are can be separately added to your cart (see section lower down this page).

  • NOTE: Nudge Bars / A-Bars are for Off-road use only - remove when on the public highway.
  • Suitable for Land Rover Defender 90 and 110 models.
  • Fits on top of the existing bumper fixing points.
  • Bumper not included as shown in photos.
  • Highest quality tubular steel 2.5” (60 mm) diameter.
  • Zinc plated for long life rust protection and black powder coated.
  • It has front brackets with eyelets for mounting lights.

Dimensions when fitted:

  • Length: 790mm
  • Height: 430mm
  • Bar Thickness: 60mm
  • Distance from grille: 110mm

Optional extras, (add them below)

We have the option to add an extension bracket for vehicles with aircon fitted and also another extension bracket for fitting lights to A-Bar where the light unit depth requires additional space. The lighting extension bracket has 12mm holes with 50mm centres.

  • Extension Brackets for Air-Con Vehicles
  • Lighting Extension Bracket for Nudge Bar
Save this product for later