Snorkel Kit / Raised Air Intake Kit

snorkel kit for land rover defender 90 or 110

We sell Land Rover Defender Snorkel Kits (also known as a Raised Air Intake). Snorkels protect engines from the damaging effects of water, dust and sand encountered in touring and off-roading.

Snorkel kit versions for Land Rover Defender 200TDI (left hand fitting kit) and 300TDI, TD5 and TDCI Puma (right hand fitting kit). Snorkel Kits are original Land Rover part number STC50265. For the 300TDI, TD5 and Puma we supply a right-hand bracket.

Roll-cage Snorkel – We also make a Defender Snorkel Kit version for Defenders with roll cages – the lower fitting is different to standard as it protrudes slightly more to accommodate for the position of the roll-cage tubing. The Masai Land Rover Defender Roll Cage Snorkel Kit is available for left hand side 200TDI and right hand 300TDI, TD5 and TDCI Puma.

Roof Hatch/ Vent/ Window - (500 x 500 & 970 x 530mm)
+3

Roof Hatch/ Vent/ Window - (500 x 500 & 970 x 530mm)

RH
£306.00
In stock
1
Product Details

Toughened Glass and Aluminium Roof Hatch / Roof Vent / Roof Light

Two sizes: 500x500mm and 970x530mm

This Roof Hatch is suitable for 4x4, horse boxes, mobile exhibition trailer, camper vans, motor home, coach, lorry, bus or any vehicle, porta-cabin, enclosure, etc - where increased light and ventilation is needed but not at the expense of security. Horsebox roof hatch / vent, trailer roof hatch, coach roof hatch light window, motor home roof light.

ADHESIVE: We recommend polymer adhesive and rivets to afix this window. See the item listed below or in the pop-up after you add this window to your cart.

USA and CANADA WARNING: Unfortunately the adhesive we sell cannot be shipped to the USA and Canada, We advise sourcing a suitable 1k polyurethane window bonding adhesive locally, similar in spec to the item listed below.

Roof Hatch / Window Features

  • Black powder coated aluminium frame.
  • Screen printed with dot fading to reduce sunlight glare and reduce heat.
  • E43 4mm single-pane toughened glass.
  • Black EPDM seals
  • Weight: 500x500 7.9kg, 970x530 9.7kg.
  • See photos above for further dimensions.
  • Injection moulded handles.
  • The 970x530 variant only includes an emergency hammer.
  • Provides ventilation gap back, front or both - by way of a sprung scissor mechanism.
  • When closed, the spring mechanism ensures the roof vent is fully sealed against the weather.
  • Available in 500x500mm and 970x530mm variants.
Save this product for later
Display prices in: GBP