Spare Wheel Carriers For Land Rover Defender

Rear Door Glass - Dark Tinted & Heated for Post 2002 Land Rover Defenders 90/110 - (Sealed in)
+3

Rear Door Glass - Dark Tinted & Heated for Post 2002 Land Rover Defenders 90/110 - (Sealed in)

LRD-RDG-POST2002
£162.00
In stock
1
Product Details
Manufacturer: Masai
OEM Part No: LR042729
Application: Rear Door Glazing
Suitable Vehicle: Defender 90 & 110

Rear Door Glass - Dark Tinted and Heated for Post 02' Land Rover Defenders 90/110 - (Sealed in)

This rear door glass is for Post 2002 rear doors for Land Rover Defenders. It is fitted with a rubber seal. Either re-use your old seal or purchase a new seal. This comes in 2 versions, one with the screen printing for the High Level Brake light and one without.

  • Standard size replacement. (Original Part Number: LR042729)
  • High quality Masai product.
  • 4mm toughened (tempered) safety glass E43R, 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
  • 70% no light transmission high quality factory-prepared dark tint, NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
  • Heat reflecting coating, glare reduction glass.

NOTE : Carefully remove rear door glass without damaging the rubber - as you may want to re-use it (although you can buy a new seal in this product's options). Carefully remove brake light from old glass as you will need to glue it to the new glass.

Options

  1. Add Rear Door Rubber Glazing Seal for Post 2002 Defenders only (Land Rover part number CVW500010).
  2. Add a pair of studs to fit high-level brake lights (Land Rover part number AWR4647).
Save this product for later
Display prices in: GBP

Land Rover Defender Spare Wheel Carriers – 90 and 110

We design and manufacture the Land Rover Defender Swing Away Spare Wheel Carriers and Land Rover Defender LARGE (heavy duty) Spare Wheel Carriers (for the Defender 90 and 110, replacement part number KTB500040) – may fit other models too – just call. Our Defender Spare Wheel Carriers are chassis mounted rather than door mounted to reduce the strain on the door hinges. Fitting instructions available.

Masai® Land Rover Defender Spare Wheel Carriers are high quality products made of heavy duty steel, with zinc plate and thermoplastic powder coat automotive paint for rust free life. Includes fitting kit and instructions. Our Land Rover Defender Spare Wheel Carrier has special hinged bushes with grease nipples to provide long-life and serviceable parts. The steel is laser-cut with superior clean welding. For Pre 2002 Defender versions of the Large spare wheel carrier a strengthening kit is included, IF requested in the options. The OEM part number is KTB500040.