Rear Door Glass - Dark Tinted & Heated for Pre 02' Land Rover Defenders 90/110 - (Bonded)
Rear Door Glass - Dark Tinted & Heated for Pre 02' Land Rover Defenders 90/110 - (Bonded)
This replacement Rear Door Glass is BONDED to the inside of the rear door, suitable for doors that are flat at the bottom of the aperture. As shown in the photo above. Usually Defenders Pre-2002, but you may have fitted a newer door so make sure to double check.
USA and 
CANADA CUSTOMERS: We cannot ship optional adhesive due to customs restrictions. You will need to source your own window adhesive. We use the Adhesive and Primer Kit listed here.
- Standard size replacement. (Original Part Number: LR042729)
- High quality Masai product.
- 4mm toughened (tempered) safety glass E43R‚Äö 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
- 70% no light transmission high quality factory-prepared dark tint‚Äö NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
- Heat reflecting coating, glare reduction glass.
Options
- Add Adhesive Sealant for Pre 2002 Defenders only.
- Add a pair of studs to fit high-level brake lights (Land Rover part number AWR4647).
Land Rover Defender Spare Wheel Carriers – 90 and 110
We design and manufacture the Land Rover Defender Swing Away Spare Wheel Carriers and Land Rover Defender LARGE (heavy duty) Spare Wheel Carriers (for the Defender 90 and 110, replacement part number KTB500040) – may fit other models too – just call. Our Defender Spare Wheel Carriers are chassis mounted rather than door mounted to reduce the strain on the door hinges. Fitting instructions available.
Masai® Land Rover Defender Spare Wheel Carriers are high quality products made of heavy duty steel, with zinc plate and thermoplastic powder coat automotive paint for rust free life. Includes fitting kit and instructions. Our Land Rover Defender Spare Wheel Carrier has special hinged bushes with grease nipples to provide long-life and serviceable parts. The steel is laser-cut with superior clean welding. For Pre 2002 Defender versions of the Large spare wheel carrier a strengthening kit is included, IF requested in the options. The OEM part number is KTB500040.
