Wide Opening Roof Window / Shooting Hatch / Deck Hatch - 810 x 600 mm

• E43 Toughened Glass with Aluminium Frame
  
• Wide Opening with Gas Struts and Lock
• 70% No-light transmission dark tint
  
• 810mm x 600mm
  

Variety of uses where increased access, light and ventilation is needed but not at the expense of security.

Although it is designed for the roof of vehicles it can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.

Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the aperture.

Once you have cut the correct shaped aperture, you will need rivets and sealant to attach the window.

Features

• Measurements: 810mm x 600mm external max
• The aperture that you cut out should be 760mm x 550mm
• The internal area is 720mm x 510mm (see diagram)
• The aperture of the cut out radius needs to be 76mm (see diagram)
• Black powder-coat painted aluminium frame
• 70% no light transmission dark tint to reduce sunlight glare
• E43 4mm toughened glass
• Two gas struts for smooth opening and closing
• Two handle locking, with keys
• If you need it completely wide open the gas strut brackets can be unscrewed from the base (see thumbnail)
• Includes rubber seal and internal bezel

Can be fitted to the roof of:

• Land Rovers and other 4x4
• Other Shooting/Leisure vehicles
• Trucks with Sleeping Pods
• Coaches and Lorries
• Containers/Sheds in Gardens
• Horseboxes
• Motor Caravans / Motor Home
• Towed Caravans
• Mobile Exhibition Trailer
• Porta-cabins / Mobile Buildings / Other Enclosure
• Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss.

Recommended optional extra, purchase below

Adhesive and rivet kit