Sliding Side Step

The Masai Sliding Side Step

Sliding Side Step suitable as: a minibus side step, a taxi side step, caravan step, motor home step, horsebox side steps, coach side step, van side step, campervan step, ambulance side sliding step, etc.

The Masai Sliding Side Step width is 400mm, length is 600mm.

A high quality sliding side step made of aluminium and manufactured by Masai Omega Automotive. Sliding Side Step Fitting Instructions and Maintenance Tips provided.  It has approval from the VCA (Vehicle Certification Agency) July 2011 – Click here to view the report; and it fully meets the requirements of the Large Bus Construction Directive 2001/85/EC regulation 107.02 up to and including supplement 5 ECE Regulation 107.03.

The Sliding Side Step maybe of interest to :

  • Bus, minibus and taxi manufacturers
  • Ambulance manufacturers
  • Horsebox manufacturers and converters
  • Van converters
  • Taxi converters
  • Campervan and motor home manufacturers and converters
  • Or private individuals who are upgrading any of the above vehicles themselves.

[fvplayer src=”https://www.masai4x4.com/wp-content/uploads/Masai-side-sliding-step.mp4″ width=”460″]

LED Lights (LSL Type) - Upgrade Kit for Land Rover Defender (73mm) - 11pcs
+3

LED Lights (LSL Type) - Upgrade Kit for Land Rover Defender (73mm) - 11pcs

LSL-LED-LRD-SET-CLR
£214.80
In stock
1
Product Details
Suitable Vehicle: All post 1983 Land Rover Defenders

LED Lights Upgrade for Land Rover Defender 90 / 110 With Flasher Relay, Fog & Reverse Lights

NOTE: In the rare case that you require 2x base plinths for the NAS size lights, let us know.

Measurements: 73mm in diameter (Same as original Land Rover lights), 95mm for Fog and Reverse.

This kit includes:

  • 2 Front Sidelights.
  • 2 Front Indicator lights.
  • 2 Rear Indicator lights.
  • 2 Rear Tail/Brake lights.
  • 1 Rear Reversing light. (95mm NAS style size)
  • 1 Rear Fog light. (95mm NAS style size)
  • 1 Speed Adjustable Flasher Relay.
  • Stainless steel screws.

Options:

  • Clear, smoked or coloured lenses (the LEDs inside will be the correct legal colours).
  • Add optional LED License Plate Light (click for details).

Features:

  • Designed for all post 1983 Land Rover Defenders.
  • E marked (EU approved) and SAE Approved.
  • Increased visibility (brighter than standard bulbs).
  • Enhances and modernises the look of your Defender.
  • Easy to fit DIY. Plug and Play!
  • No need for resistors.
  • Flash speed adjustable relay, has 4 pins and replaces your existing relay.
  • 73mm diameter.
  • AMP type connected fitted.
  • Multi-voltage 9-33V.
  • Waterproof to IP67.
Save this product for later
Display prices in: GBP