Sliding Side Step

The Masai Sliding Side Step

Sliding Side Step suitable as: a minibus side step, a taxi side step, caravan step, motor home step, horsebox side steps, coach side step, van side step, campervan step, ambulance side sliding step, etc.

The Masai Sliding Side Step width is 400mm, length is 600mm.

A high quality sliding side step made of aluminium and manufactured by Masai Omega Automotive. Sliding Side Step Fitting Instructions and Maintenance Tips provided.  It has approval from the VCA (Vehicle Certification Agency) July 2011 – Click here to view the report; and it fully meets the requirements of the Large Bus Construction Directive 2001/85/EC regulation 107.02 up to and including supplement 5 ECE Regulation 107.03.

The Sliding Side Step maybe of interest to :

  • Bus, minibus and taxi manufacturers
  • Ambulance manufacturers
  • Horsebox manufacturers and converters
  • Van converters
  • Taxi converters
  • Campervan and motor home manufacturers and converters
  • Or private individuals who are upgrading any of the above vehicles themselves.

[fvplayer src=”https://www.masai4x4.com/wp-content/uploads/Masai-side-sliding-step.mp4″ width=”460″]

Roof Hatch/ Vent/ Window - (500 x 500 & 970 x 530mm)
+3

Roof Hatch/ Vent/ Window - (500 x 500 & 970 x 530mm)

RH
£306.00
In stock
1
Product Details

Toughened Glass and Aluminium Roof Hatch / Roof Vent / Roof Light

Two sizes: 500x500mm and 970x530mm

This Roof Hatch is suitable for 4x4, horse boxes, mobile exhibition trailer, camper vans, motor home, coach, lorry, bus or any vehicle, porta-cabin, enclosure, etc - where increased light and ventilation is needed but not at the expense of security. Horsebox roof hatch / vent, trailer roof hatch, coach roof hatch light window, motor home roof light.

ADHESIVE: We recommend polymer adhesive and rivets to afix this window. See the item listed below or in the pop-up after you add this window to your cart.

USA and CANADA WARNING: Unfortunately the adhesive we sell cannot be shipped to the USA and Canada, We advise sourcing a suitable 1k polyurethane window bonding adhesive locally, similar in spec to the item listed below.

Roof Hatch / Window Features

  • Black powder coated aluminium frame.
  • Screen printed with dot fading to reduce sunlight glare and reduce heat.
  • E43 4mm single-pane toughened glass.
  • Black EPDM seals
  • Weight: 500x500 7.9kg, 970x530 9.7kg.
  • See photos above for further dimensions.
  • Injection moulded handles.
  • The 970x530 variant only includes an emergency hammer.
  • Provides ventilation gap back, front or both - by way of a sprung scissor mechanism.
  • When closed, the spring mechanism ensures the roof vent is fully sealed against the weather.
  • Available in 500x500mm and 970x530mm variants.
Save this product for later
Display prices in: GBP