Sliding Side Step

The Masai Sliding Side Step

Sliding Side Step suitable as: a minibus side step, a taxi side step, caravan step, motor home step, horsebox side steps, coach side step, van side step, campervan step, ambulance side sliding step, etc.

The Masai Sliding Side Step width is 400mm, length is 600mm.

A high quality sliding side step made of aluminium and manufactured by Masai Omega Automotive. Sliding Side Step Fitting Instructions and Maintenance Tips provided.  It has approval from the VCA (Vehicle Certification Agency) July 2011 – Click here to view the report; and it fully meets the requirements of the Large Bus Construction Directive 2001/85/EC regulation 107.02 up to and including supplement 5 ECE Regulation 107.03.

The Sliding Side Step maybe of interest to :

  • Bus, minibus and taxi manufacturers
  • Ambulance manufacturers
  • Horsebox manufacturers and converters
  • Van converters
  • Taxi converters
  • Campervan and motor home manufacturers and converters
  • Or private individuals who are upgrading any of the above vehicles themselves.

[fvplayer src=”https://www.masai4x4.com/wp-content/uploads/Masai-side-sliding-step.mp4″ width=”460″]

Wide Opening Roof Window / Shooting Hatch / Deck Hatch - 810 x 600 mm
+3

Wide Opening Roof Window / Shooting Hatch / Deck Hatch - 810 x 600 mm

DEF810x600
£325.00
In stock
1
Product Details

Wide Opening Roof Window / Shooting Hatch / Deck Hatch - 810 x 600 mm

  • E43 Toughened Glass with Aluminium Frame
  • Wide Opening with Gas Struts and Lock
  • 70% No-light transmission dark tint
  • 810mm x 600mm

Variety of uses where increased access, light and ventilation is needed but not at the expense of security.

Although it is designed for the roof of vehicles it can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.

Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the aperture.

Once you have cut the correct shaped aperture, you will need rivets and sealant to attach the window.

Features

  • Measurements: 810mm x 600mm external max
  • The aperture that you cut out should be 760mm x 550mm
  • The internal area is 720mm x 510mm (see diagram)
  • The aperture of the cut out radius needs to be 76mm (see diagram)
  • Black powder-coat painted aluminium frame
  • 70% no light transmission dark tint to reduce sunlight glare
  • E43 4mm toughened glass
  • Two gas struts for smooth opening and closing
  • Two handle locking, with keys
  • If you need it completely wide open the gas strut brackets can be unscrewed from the base (see thumbnail)
  • Includes rubber seal and internal bezel

Can be fitted to the roof of:

  • Land Rovers and other 4x4
  • Other Shooting/Leisure vehicles
  • Trucks with Sleeping Pods
  • Coaches and Lorries
  • Containers/Sheds in Gardens
  • Horseboxes
  • Motor Caravans / Motor Home
  • Towed Caravans
  • Mobile Exhibition Trailer
  • Porta-cabins / Mobile Buildings / Other Enclosure
  • Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss.

Recommended optional extra, purchase below

Adhesive and rivet kit

Save this product for later
Display prices in: GBP