Defender Sound Deadening and Heat Proofing

Sound Deadening and Insulation for Defenders

Our much-loved Land Rover Defenders can be on the noisy side at times; however, the good news is that this can be alleviated with Sound Deadening and Insulation sheets. There are no quick fixes to reduce road and engine noise and if you want the problem solved properly it requires a bit of work, but in the end, you’ll be happier with the vast improvement in the quality of the drive. Unwanted noise is created within most vehicles, especially the Land Rover Defender. This occurs across most parts of the vehicle, such as the doors, the engine bay etc. All of which need to be treated using several different methods to achieve worthwhile results.

Pair of 50 Watt, 9" HID Xenon Off-road Driving Lights

9-HID-70W-3900-SB
£194.40
In stock
1
Product Details

Pair of 50 Watt, 9" HID Xenon Off-road Driving Lights

We recommend the optional wiring kit which can be connected into an OE dashboard switch as an alternative to the pre-fitted switch. Wiring kit includes fuse, switch and relay. You can purchase that optional extra below

Main Features:

  • Sold as a pair
  • Angle: Can adjust angle
  • Power: 50w each
  • Beam: Flood or Spot
  • Lumens output: Approx 4,100 lumen each
  • Operating volts: 9V-32V DC
  • Built-in Starter and Ballast
  • Use: Off-road use
  • HID brightness is three times greater than ordinary halogen
  • Colour: Super white
  • Low infrared and ultraviolet spectral output
  • HID has no filament, so won't break from shock
  • The red trim ring is anodised aluminium
  • Energy-efficient: Approx 50% less than Halogen
  • Size: 10" wide with 9" lens
  • Safety: Short-circuit protection, open-circuit protection, over-voltage protection, reverse-connection protection, over-current protection
  • HID Bulb : H3
  • Lens: Toughened glass
  • Work temperature: -40-80¬¨‚àûC
  • Lifespan: Approx 3,000 operating hours
  • Colour temperature: 6,000K
  • Cover: includes detachable clear polycarbonate lens cover
  • Material: ABS plastic housing and stainless steel bracket
  • Housing colour: Black
  • Size: 250mm wide x 180mm deep x 270mm high

Applications:

  1. Engineering vehicle Flood/Spot lights: excavator, road-roller, bulldozer, crane and mining truck etc.
  2. Specialised vehicle Flood/Spot lights: fire engine, police cars, road-side rescue vehicle, communication vehicle, military command vehicle etc.
  3. Off-Road vehicle Flood/Spot lights: 4x4, ATVs, SUV, truck, fork lift, trains, boat, bus, and tanks
Save this product for later