Panoramic Rear Door Glass - Dark Tinted & Heated for Land Rover Defenders 90/110 - (Bonded)

USA and CANADA CUSTOMERS: We cannot ship this product with the adhesive fitting kit due to customs restrictions. You will need to source your own adhesive. We recommend at least 300ml x 3 of window adhesive to fit the sides and quarter light windows.

• KIT comes with: 1) Plastic shim for the rear wiper blade hole. (See photo above) 2) Rubber seal to fit around the inside of the door glass aperture (Purely cosmetic). - NOTE: This seal is different for pre and post 2002 rear doors, so please tell us accurately which you have.
• High quality Masai product.
• 4mm toughened (tempered) safety glass E43R‚Äö 00320 DOT6. European Commission Directive 2001/92/EC, Regulation No 43 of the UN/ECE. DOT6 US motor vehicle specification.
• 70% no light transmission high quality factory-prepared dark tint NOT an attached film which can be scratched or peeled off. Appears as grey with a hint of green.
• Heat reflecting coating, glare reduction glass.

NOTE : Carefully remove brake light from old glass as you will need to glue it to the new glass.

Options

1. Add a pair of studs to fit high-level brake lights (Land Rover part number AWR4647).