Blind Spot Window for Defender

masai Defender blind spot windows

We manufacture and sell dark tinted and silicone bonded Blind Spot Side Windows for panel sided Land Rover Defenders. These very attractive and unique windows are typically sold in pairs – offside and nearside, and not only provide extra visibility but they look great too. They have a 70% no-light transmission dark privacy tint. The tint is factory-prepared – the glass is actually tinted and NOT a stuck on film which can peel off.

WHY NOT GET TWO PAIRS? – Also available as the Masai Tinted Double Side Windows for Land Rover Defenders.

They are easily fitted DIY. View and print the Land Rover Defender Masai Blind Spot Window Fitting Instructions.

Our blind spot side windows are made using E43R toughened safety glass – Masai Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms.

Fitting to OTHER TYPES OF VEHICLES – If you have a panel sided van or other type of vehicle or enclosure you may also be able fit our bonded tinted blind spot windows – call us if in any doubt.

masai-defender-side-windows

Sunroof - 1157 x 527mm - DARK Tint (Special Order)
+3

Sunroof - 1157 x 527mm - DARK Tint (Special Order)

DEF1157x527
£334.80
In stock
1
Product Details
Sold As: SPECIAL ORDER (6 WEEKS)

Special Order Sun Roof - 1157 x 527 mm - DARK tint for all kinds of vehicles

VERY IMPORTANT: This particular sunroof takes 6 weeks to manufacture and is specially made to order for you, therefore purchase orders cannot be cancelled once we have started manufacture, therefore no returns nor refunds either. Please call us before ordering if in any doubt.

This sunroof has a variety of uses where increased access, light and ventilation is needed but not at the expense of security.

Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the aperture.

Once you have cut the correct shaped aperture for the Sun Roof, you will need rivets and silicone sealant to attach the Sun Roof.

Please block the drain holes with silicone sealant when used horizontally on a roof. This Sun Roof can also be used vertically on its side - in which case do not block the drain holes.

If you need the Sun Roof completely wide open the gas strut brackets can be unscrewed from the frame.

PLEASE NOTE: You need to abide by all laws, regulations and standard practices with regard to the fitting and usage of these windows.

  • Includes two Gas Struts for smooth opening and closing.
  • Two handle locking with keys.
  • The maximum amount these windows open is as seen in the above photo and is 200mm from the vehicle body.
  • Measurements: 1157mm x 527mm external max. (see diagram, Measurement A)
  • The internal area is 1067mm x 437mm (see diagram, Measurement C).
  • The size of the aperture you need to cut out is 1107mm x 477mm (see diagram, Measurement B).
  • The corner radius of the aperture you need to cut out is 76mm (see diagram).
  • Black powder-coat painted aluminium frame.
  • Includes rubber seal and internal bezel.
  • E43 4mm toughened safety glass.
  • 70% No-Light transmission Dark Tint.
  • Factory prepared tint - not a stuck on film.
  • Easy to fit DIY.
  • Fitting service also available - just call.
  • Price is for one Sun Roof.

Can be fitted to :

  • Land Rovers and other 4x4
  • Other Shooting/Leisure vehicles
  • Trucks with Sleeping Pods
  • Coaches and Lorries
  • Horseboxes
  • Motor Caravans / Motor Home
  • Towed Caravans
  • Porta-cabins / Mobile Buildings / Other Enclosure
  • Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss

Optional extras

  1. Rivets and Sealant

DOWNLOAD LINK: Fitting Instructions

Note: These fitting instructions are NOT actually for this specific window but the principles are the same.

Save this product for later
Display prices in: GBP