Suitable for all Defenders from 200tdi to Puma models.
We have both genuine OEM Land Rover Puma Bonnets made of aluminium (part number BKA710140), and cheaper aftermarket versions – both standard and reinforced.
The aftermarket version Land Rover Defender Puma Bonnet is made of GRP – Glass Reinforced Plastic with steel fixtures for original fasteners; it is durable and flexible for heavy use. It is light-weight compared to original aluminium Defender bonnets – the net weight is 10KG. Noise transmission is much less than the OEM aluminium version. It will reduce the engine noise.
NOTE : Both types are unfinished – meaning they require some filling, primer and top coats of paint.
+3
810mm x 477mm Camper Style Side Window - DARK tint
DEF810x477
£318.00
In stock
1
Product Details
810mm Camper Style Side Window - DARK tint for HARD-TOP Land Rover Defender and other vehicles
Variety of uses where increased access, light and ventilation is needed but not at the expense of security.
This version is narrower than "standard sized" Land Rover Defender side windows and so cannot be used as a direct replacement - only for use as a Hard-top conversion.
Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the aperture.
Once you have cut the correct shaped aperture, you will need rivets and silicone sealant to attach the window.
If you need it completely wide open the gas strut brackets can be unscrewed from the frame.
Originally designed for use on the side of a vehicle, however it can also be used on the roof of a vehicle as a sun roof, in this case the drain holes must be blocked with silicone sealant.
SOLD as SINGLE WINDOWS (Price is NOT for a pair)
Includes two Gas Struts for smooth opening and closing
Two handle locking with keys
The maximum amount these windows open is as seen in the above photo and is 200mm from the vehicle body.
Measurements: 810mm x 477mm external max
The size of the aperture needed is 760mm x 427mm (this is smaller than Land Rover Standard).
The internal area is 720mm x 387mm (see diagram)
The Radius of the cut out aperture needs to be 76mm
Black powder-coat painted aluminium frame
Made to original Land Rover quality - BUT they do not rattle or leak
Standard size replacement
Includes rubber seal and internal bezel
E43 4mm toughened safety glass
70% No-Light transmission Dark Tint
Factory prepared tint - not a stuck on film
Easy to fit DIY
Fitting service also available - just call
Can be fitted to the side of:
Land Rovers and other 4x4
Other Shooting/Leisure vehicles
Trucks with Sleeping Pods
Coaches and Lorries
Containers/Sheds in Gardens
Horseboxes
Motor Caravans / Motor Home
Towed Caravans
Mobile Exhibition Trailer
Porta-cabins / Mobile Buildings / Other Enclosure
Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss
These fitting instructions are NOT actually for this specific window but the principles are the same. Be very careful to cut the exact shape aperture needed. This window is not the "Standard size" Landy window.