Suitable for all Defenders from 200tdi to Puma models.
We have both genuine OEM Land Rover Puma Bonnets made of aluminium (part number BKA710140), and cheaper aftermarket versions – both standard and reinforced.
The aftermarket version Land Rover Defender Puma Bonnet is made of GRP – Glass Reinforced Plastic with steel fixtures for original fasteners; it is durable and flexible for heavy use. It is light-weight compared to original aluminium Defender bonnets – the net weight is 10KG. Noise transmission is much less than the OEM aluminium version. It will reduce the engine noise.
NOTE : Both types are unfinished – meaning they require some filling, primer and top coats of paint.
+3
Masai Sliding Side Windows - Dark Tint - for Defender 110 2-Door 200TDI, 300TDI, TD5 & PUMA TDCI (50/50 radius) - pair
MUC770DT
£384.00
In stock
1
Product Details
Manufacturer:Masai
Application:Replace Side Windows or Install into a Panel Van / Horsebox / Van
Colour:Dark Tinted 70% (30% no light transmission)
Masai Dark Tint Slide Opening Side Windows for Defender 110 2-Door 200TDi, 300TDI, TD5 & PUMA TDCI
Could also be fitted to vans, horseboxes or any vehicle with the panel space for it.
Aperture cut-out size is: L: 770mm x H: 427mm. Entire window dimensions are: L: 800mm x 457mm.
Sold as a pair, if you want two windows each side of your vehicle, then you will need to order TWO pairs. We have developed matching interior window trims for this configuration.
Corner radius are 50 degrees on all four corners. (50/50)
Made to original Land Rover quality - BUT they do not rattle or leak.
Original quality Land Rover aluminium profile and catches.
Includes rubber seal/trim which covers over the rivet heads.
E43R toughened safety glass.
Factory prepared tint - not a stuck on film. (Dark tint 70% or 30% no light transmission)