Side Windows for Land Rover Defender

Side Windows for Land Rover Defender

We manufacture and sell replacement sliding side windows for the Land Rover Defender in pairs – offside and nearside. Clear, green or dark tinted Defender privacy windows. They are standard size replacements – Land Rover part numbers MUC3766 superseded by MWC4734, and MUC3767 superseded by MWC4735, and the kits include a new rubber seal/trim.

We also now sell “double” side sliding windows for the Defender. Two sets of Land Rover catches are fitted to these deluxe double side sliding windows – so the window can be opened from both ends. This NEW type is ideal when travelling with children, extra passengers and pets in the back of your Defender.

Sunroof - 1107 x 477 mm - DARK tint
+3

Sunroof - 1107 x 477 mm - DARK tint

DEF1107x477-SR
£334.80
In stock
1
Product Details

Sun Roof - 1107 x 477 mm - DARK tint for all kinds of vehicles

This Sunroof has a variety of uses where increased access, light and ventilation is needed but not at the expense of security.

Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the aperture.

Once you have cut the correct shaped aperture for the Sun Roof, you will need rivets and sealant to attach the Sun Roof.

Please block the drain holes with silicone sealant when used horizontally on a roof. This Sun Roof can also be used vertically on its side - in which case do not block the drain holes.

If you need the Sun Roof completely wide open the gas strut brackets can be unscrewed from the frame.

PLEASE NOTE: You need to abide by all laws, regulations and standard practices with regard to the fitting and usage of these windows.

  • Includes two Gas Struts for smooth opening and closing.
  • Two handle locking with keys.
  • The maximum amount these windows open is as seen in the above photo and is 200mm from the vehicle body.
  • Measurements: 1107mm x 477mm external max.
  • The internal area is 1017mm x 387mm (see diagram).
  • The size of the aperture you need to cut out is 1057mm x 427mm (see diagram).
  • The corner radius of the aperture you need to cut out is 76mm (see diagram).
  • Black powder-coat painted aluminium frame.
  • Includes rubber seal and internal bezel.
  • E43 4mm toughened safety glass.
  • 70% No-Light transmission Dark Tint.
  • Factory prepared tint - not a stuck on film.
  • Easy to fit DIY.
  • Fitting service also available - just call.
  • Price is for one Sun Roof.

Can be fitted to :

  • Land Rovers and other 4x4
  • Other Shooting/Leisure vehicles
  • Trucks with Sleeping Pods
  • Coaches and Lorries
  • Horseboxes
  • Motor Caravans / Motor Home
  • Towed Caravans
  • Porta-cabins / Mobile Buildings / Other Enclosure
  • Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss

Download ......Fitting Instructions

Note: These fitting instructions are NOT actually for this specific window but the principles are the same.

Recommended optional extra, purchase below

  • Adhesive and rivet kit
Save this product for later
Display prices in: GBP

Our Defender windows have been designed as replacements for the Land Rover Defender 90 and 110 and may fit other models – just call to discuss. They are easy to fit if you know a bit about DIY, you will need a drill and a rivet gun. A template is available as an optional extra. The size of the aperture needed is 1057mm x 427mm – which is the Land Rover standard size for Defender rear side windows. Fitting service also available – just call.

We manufacture to original Land Rover quality using original shape Land Rover aluminium profile and locks/catches. Our windows are made using E43R toughened safety glass – Omega Automotive has been manufacturing automotive safety glass and many other vehicle parts for many decades and supplies all around the World to various automotive firms.

Many old windows rattle, leak and are draughty – our replacement land rover defender windows will solve that – in addition if you order the tinted versions you will be reducing glare and reflecting some of the heat on a hot day. The tint is factory-prepared – the glass is actually tinted and not a stuck on film which can peel off – film is not simple to apply in any case as the glass has to be removed.