We sell Land Rover Defender Snorkel Kits (also known as a Raised Air Intake). Snorkels protect engines from the damaging effects of water, dust and sand encountered in touring and off-roading.
Snorkel kit versions for Land Rover Defender 200TDI (left hand fitting kit) and 300TDI, TD5 and TDCI Puma (right hand fitting kit). Snorkel Kits are original Land Rover part number STC50265. For the 300TDI, TD5 and Puma we supply a right-hand bracket.
Roll-cage Snorkel – We also make a Defender Snorkel Kit version for Defenders with roll cages – the lower fitting is different to standard as it protrudes slightly more to accommodate for the position of the roll-cage tubing. The Masai Land Rover Defender Roll Cage Snorkel Kit is available for left hand side 200TDI and right hand 300TDI, TD5 and TDCI Puma.
Sliding Side Windows for Defender 200TDi/300TDi and TD5 (3 Tints) (50/50 radius) - pair
Sliding Side Windows for Defender 200TDi/300TDi and TD5 (Dark, Green & Clear Tints) - PAIR
IMPORTANT NOTE: We have two variants of the dark rear side windows - to fit side window apertures with 70mm radius bottom corners (for most post-2004/5 Defenders and Puma/TDCi Defenders), and also 50mm radius bottom corners (pre-2004/5 200/300Tdi and TD5 Defenders).
This listing is for the version with 50mm radius bottom corners. You can still purchase these if your vehicle has 70mm radius bottom corners in the aperture for the window, but you will need to cut them out to 50mm. The 70mm version window is here.
If your Defender is a hardtop and does not currently have rear side windows then either of our 50mm or 70mm side windows can be fitted irrespective of the year of your vehicle.
Download ......Masai Defender side windows Fitting Instructions
- Sold as a pair - offside and nearside
- Made to original Land Rover quality - BUT they do not rattle or leak
- Original quality Land Rover aluminium profile and catches
- Standard size replacement
- Includes rubber seal/trim which covers over the rivet heads
- E43R toughened safety glass
- Factory prepared tint - not a stuck on film
- Easy to fit DIY
- The size of the aperture needed is 1057mm x 427mm - which is the Land Rover standard size for Defender rear side windows
- Fitting service also available - just call
Equivalent and compatible with Land Rover part numbers:
- MUC3766 (50mm) superseded by MWC4734 (70mm)
- MUC3767 (50mm) superseded by MWC4735 (70mm)
Read our article about the best way to locate your side windows here
Optional extras
- Template to help cut out aperture - needed if you are converting a panel van/hard top
- Rivets and Sealant (to save you the hassle of going to the DIY store)
