LED and HID vehicle lights

Here we have a wide selection of vehicle lights / work lights / driving lights / LED spot lights / flood lights / LED Light Bars and interior LED Lights. We have high luminosity LED lights and ultra bright Xenon HID lights, some are IP65 and some are IP67 compliant. Some have housings made of diecast aluminium and others are ABS plastic. Most have a wide voltage ranges.

We also have a range of NAS LED lights for Land Rover Defenders, clear sets and coloured sets. These Land Rover Defender NAS LED lights are for all post 1983 90 and 110, include front and rear NAS LED Lights with plinths, are waterproof to IP67, E marked (EU approved) and SAE approved, provide increased visibility (brighter than standard bulbs) and they enhance and modernise the look of your Defender, easy to fit DIY.

We also have a dedicated website for LED and HID Vehicle lights. See individual specifications for details. Call if you have any questions.

Wide Opening Roof Window / Shooting Hatch / Deck Hatch - 810 x 600 mm
+3

Wide Opening Roof Window / Shooting Hatch / Deck Hatch - 810 x 600 mm

DEF810x600
£325.00
In stock
1
Product Details

Wide Opening Roof Window / Shooting Hatch / Deck Hatch - 810 x 600 mm

  • E43 Toughened Glass with Aluminium Frame
  • Wide Opening with Gas Struts and Lock
  • 70% No-light transmission dark tint
  • 810mm x 600mm

Variety of uses where increased access, light and ventilation is needed but not at the expense of security.

Although it is designed for the roof of vehicles it can also be fitted as a Side Window, but you will need to carefully drill small drain holes into the bottom of the aluminium frame to discharge water.

Includes Internal Bezel Trim (aluminium L section 20mm x 20mm, black powder-coat paint). This bezel can be used as a template to cut out the aperture.

Once you have cut the correct shaped aperture, you will need rivets and sealant to attach the window.

Features

  • Measurements: 810mm x 600mm external max
  • The aperture that you cut out should be 760mm x 550mm
  • The internal area is 720mm x 510mm (see diagram)
  • The aperture of the cut out radius needs to be 76mm (see diagram)
  • Black powder-coat painted aluminium frame
  • 70% no light transmission dark tint to reduce sunlight glare
  • E43 4mm toughened glass
  • Two gas struts for smooth opening and closing
  • Two handle locking, with keys
  • If you need it completely wide open the gas strut brackets can be unscrewed from the base (see thumbnail)
  • Includes rubber seal and internal bezel

Can be fitted to the roof of:

  • Land Rovers and other 4x4
  • Other Shooting/Leisure vehicles
  • Trucks with Sleeping Pods
  • Coaches and Lorries
  • Containers/Sheds in Gardens
  • Horseboxes
  • Motor Caravans / Motor Home
  • Towed Caravans
  • Mobile Exhibition Trailer
  • Porta-cabins / Mobile Buildings / Other Enclosure
  • Sailing Boats and Narrow Boats as a Deck Hatch possibly - call to discuss.

Recommended optional extra, purchase below

Adhesive and rivet kit

Save this product for later
Display prices in: GBP